5 Best Lid Switches for Whirlpool Washers (November 2026)
The best Whirlpool washing machine lid switches include the SuperDi 10Pcs 3949247 Washer Lid Switch Fits for older 3949247 systems, the Blutoget Upgraded W10404050 W10238287 Washer Lid Lock for a complete W10404050 repair, and the M Motico UPGRADED W10404050 W10238287 Washer Lid Lock for W10404050 replacement coverage.
On this page (5 sections)
The best Whirlpool washing machine lid switch for many older Whirlpool and Kenmore top-load washers is the SuperDi 3949247 10-pack. That pick applies only when your washer already uses the 3949247 part family.
Choose a W10404050 kit for a matching 4-wire lock system. Choose a W11307244 assembly when your washer uses the matching 3-wire family.
A lid switch is a safety interlock. It detects lid position and can stop spinning or agitating when the lid is open.
A switch that fails to register a closed lid can stop a cycle even when the washer is otherwise working. A failed switch may also be linked with no-start, no-spin, no-drain or blinking-lock symptoms.
The same symptoms can come from a worn strike, a loose connector or a different washer fault. Treat them as a starting point, not proof that a switch is the only part to replace.
Check the error code and strike alignment before buying a replacement. If the lid locks firmly and the washer starts normally, the switch may not be the problem.
The right replacement is determined by the full washer model number and part number, not by the Whirlpool name alone. Whirlpool, Kenmore, Maytag and Amana models can share a platform while using different lid-lock parts.
Before ordering, compare the old switch, connector, wire count, lid strike and mounting points with the replacement. A close visual match is not enough when wiring or part family differs.
Keep the old switch until the replacement is checked. The part number printed on the old unit is often faster to verify than a long compatibility list.
Disconnect power before removing panels or unplugging a connector. A correct match should fit the existing mounting points without force.
If plug shape or wire count differs, stop and recheck the model number. Once the right family is identified, each option here is built for a different installed system.
Care after installation is mostly about watching the first few cycles. The lid should close, the lock should engage and the washer should wait for the lid signal before spin.
If the lock clicks without catching, the strike position may need attention. A switch can only work when the lid and strike meet it in the right place.
Use the model number and old part number as your guide for every step. That approach avoids most wrong part orders.
Set up the repair area before you begin. Keep basic hand tools ready and keep the washer lid supported while you work.
Our picks at a glance
-
1
Best for older 3949247 systemsSuperDi 10Pcs 3949247 Washer Lid Switch Fits
9.7/10 our score
See it on Amazon -
2
Best for a complete W10404050 repairBlutoget Upgraded W10404050 W10238287 Washer Lid Lock
9.6/10 our score
See it on Amazon -
3
Best for W10404050 replacement coverageM Motico UPGRADED W10404050 W10238287 Washer Lid Lock
9.6/10 our score
See it on Amazon
- 4
Check itTechecook 2026 Upgraded W11307244 W10682535 Washer Lid
Best for 3-wire W11307244 systems - 5
Check itReplizo W11307244 W10682535 Washer Lid Lock Switch
Best for a focused W11307244 replacement
The best Whirlpool washer lid switches for different repairs
The best choice depends on the part family already installed in your washer. SuperDi is the strongest pick for the 3949247 family, Blutoget and M Motico cover W10404050 systems, and Techecook and Replizo cover W11307244 systems.
SuperDi 10Pcs 3949247 Washer Lid Switch Fits: Best for older 3949247 systems
- 10-pack
- 3949247 part number
- Fits Whirlpool and Kenmore washing machines
- White
This 10-pack suits shoppers whose washer matches the 3949247 part family and listed Whirlpool or Kenmore models. It offers extra replacement switches, but model matching matters more than the pack size.
Pros
- 10 switches in one pack
- Broad listed model coverage
- Includes several replacement part numbers
Cons
- Only suitable for matching 3949247 systems
- The full model list should be checked before ordering
SuperDi's 3949247 switch is the highest-scoring choice for older Whirlpool and Kenmore washers that match the 3949247 part family. The pack contains 10 white switches, so it suits a repair plan that needs spare parts or several compatible machines.
The stated replacement numbers include 3949237, 3949247VP, AP5983746, PS11722098 and PS350434. The model coverage includes many Kenmore Series 110 washers and several Whirlpool model families.
This pick can address symptoms such as a washer that won't drain, a timer that won't advance, a machine that won't start, or a washer that pumps but won't spin. Those symptoms can have other causes, so use the model list and the washer's behavior together.
For another top-load repair, see Kenmore washer suspension rods.
SuperDi describes installation with a screwdriver and directs buyers toward checking repair instructions or videos. Disconnect power before opening the washer and confirm that the connector and mounting points match the old part.
Choose this option when your washer matches 3949247. If your machine uses W10404050 or W11307244, select the matching part family instead.
Blutoget Upgraded W10404050 W10238287 Washer Lid Lock: Best for a complete W10404050 repair
- W10404050 and W10238287 replacement
- W10240513 lid strike
- 4-wire switch
- White and grey bezels
This kit fits shoppers who need the W10404050 switch assembly plus the lid strike and bezels. Its 4-wire connection and model coverage make the exact washer model check essential.
Pros
- Includes the lid strike
- Includes 2 bezels
- 730-day after-sales service
Cons
- Not for every Whirlpool washer
- Requires a 4-wire W10404050 system
Blutoget is the best fit for a complete W10404050 repair because the kit includes the lock switch, W10240513 lid strike, white bezel, grey bezel and an instruction sheet. The switch uses a 4-wire plug connection.
The W10404050 assembly replaces listed numbers including W10238287, W10404050VP, W10744659, AP5263307, PS3497627 and EAP3497627. The lid strike replaces listed numbers including WPW10240513, AP6017583 and PS11750882.
The kit covers listed Whirlpool, Maytag, Kenmore and Amana models. Examples include Whirlpool WTW4800XQ0, WTW4810EW0 and WTW4900AW0, plus several Maytag MVWX and MVWC models.
Blutoget identifies the switch as a safety part that detects whether the lid is open or closed. It can help with a lid that will not close, a washer that will not start, a cycle that stops after filling, or a washer that will not spin or drain when the lock system is faulty.
The ABS assembly comes with 730 days of after-sales service. Confirm your model number and the 4-wire connection before ordering, because a W10404050 kit is not a universal Whirlpool washer lid switch.
M Motico UPGRADED W10404050 W10238287 Washer Lid Lock: Best for W10404050 replacement coverage
- W10404050 switch assembly
- W10240513 lid strike
- White and grey bezels
- 1-year warranty
M Motico is another complete W10404050 repair kit with the switch, strike, 2 bezels and instructions. It suits shoppers comparing a W10404050 replacement against their washer model number.
Pros
- Includes the strike and bezels
- Works across several listed brands
- 1-year warranty
Cons
- Compatibility is model specific
- The W10404050 part family must match
M Motico is another strong choice for a W10404050 washer lid lock repair. It includes 1 switch assembly, 1 W10240513 lid strike, 2 bezels and 1 instruction sheet, giving you the main pieces used in this repair.
The switch replaces W10238287, W10404050VP, W10744659, AP5263307, 1938607, EAP3497627, PS3497627 and other listed numbers. The strike replaces W10240513, WPW10240513, AP4514459, AP6017583 and other listed numbers.
Its listed compatibility includes Whirlpool, Cabrio, Duet, Maytag, Centennial, Bravos X, Amana and Kenmore 110 series top-load washers. Examples include 1CWTW4740YQ0, 7MMVWC100DW2, CAW9244BW0, NTW4600YQ1 and RTW4641BQ0.
M Motico connects the lock system with problems such as a blinking lock light, a lid that will not lock or open, a washer that will not start, or a washer that will not spin or cycle. Unplug the washer and shut off the water supply before installation.
The kit has a 1-year warranty. Pick it when your model matches W10404050 and you want the strike and bezels included with the replacement switch.
Techecook 2026 Upgraded W11307244 W10682535 Washer Lid: Best for 3-wire W11307244 systems
- W11307244 and W10682535 replacement
- 3-wire assembly
- ABS and PBT materials
- 3-year warranty
This single switch assembly suits a washer that uses the W11307244 or W10682535 part family with a 3-wire connection. Check the wire count and model number before ordering.
Pros
- 3-wire assembly
- Wide listed brand coverage
- 3-year warranty
Cons
- Only 1 assembly included
- Not interchangeable with every lid-lock design
Techecook is the best choice here for a Whirlpool washer that uses the W11307244 or W10682535 part family with 3 wires. The package contains 1 lid lock switch assembly, so it is a focused replacement rather than a multi-part kit.
The assembly is made with ABS and PBT materials and has a corrugated tube for the wire harness. Techecook lists compatibility with Whirlpool, Maytag, Kenmore, Crosley, Admiral, Amana, Inglis and Roper washing machines.
Listed replacement numbers include W10682535, W10838613, W11253733, AP5981544, AP5988772, AP6832601, PS11702228 and PS12704713. Listed model examples include MVWX655DW1, WTW5000DW1, RTW4516FW2, VAW3584GW1, NTW4516FW1 and MVWC565FW0.
The switch can address a lid that will not close or open, a latch that stops working, a flashing lock light, random stopping or an error code tied to the lock system. Disconnect power and wear work gloves during installation, as the product instructions advise.
Techecook provides a 3-year warranty. Confirm that your washer uses 3 wires before choosing this assembly, since it is not the same system as the W10404050 4-wire kits.
Replizo W11307244 W10682535 Washer Lid Lock Switch: Best for a focused W11307244 replacement
- W11307244 and W10682535 replacement
- Panel mount
- Plug-in connector
- Included switch assembly
Replizo is a focused replacement for listed Amana, Whirlpool and Maytag models using the W11307244 or W10682535 part family. Its model and connector details should be compared with the old switch.
Pros
- Focused replacement part
- Panel-mount design
- Plug-in connector
Cons
- Model coverage is narrower than some alternatives
- Only 1 switch assembly is included
Replizo is a focused W11307244 and W10682535 replacement for listed Amana, Whirlpool and Maytag washing machines. It includes 1 W11307244 washer lid lock switch assembly with a panel-mount design and plug-in connector.
The replacement part numbers include W10682535, W10838613VP, W10838613, W11253733, PS12704713 and AP6832601. Listed compatible models include MVWX655DW1, WTW5000DW1, WTW5000DW2, MVWX655DW2, MVWC565FW1, 1CWTW4845EW1, 2DWTW4705EW0, 110.2024251 and 110.2036281.
Replizo describes the switch as a replacement for a washer door that will not open or close, a lock failure error code, or a lock that has aged, stuck, worn or broken. These symptoms can also come from wiring or another washer component.
The switch has a 1-way circuit, normally open contacts, a push-button control and 2 positions. The data identifies its operating voltage as 240 volts and its current rating as 15 milliamps.
Choose Replizo when the model number and part family match and you want a single focused replacement. Check the connector and mounting points before installation.
How we compared these Whirlpool lid switch replacements
We compared part families, wire counts, included repair pieces and listed model coverage for a compatible Whirlpool washer lid switch. The score also weighs how useful each design is for a specific repair.
A lid switch that does not match the installed system cannot fix the problem. Compatibility therefore sits ahead of pack size, included extras and warranty length in our ranking.
The SuperDi pick ranks first because it covers the 3949247 family and provides 10 switches. It suits older Whirlpool and Kenmore systems that match that part number.
Blutoget and M Motico follow closely because they combine a W10404050 switch with a lid strike and bezels. Those kits help when the repair needs more than the switch alone.
The strike is the part the lock engages when the lid closes. Replacing a worn strike alongside the switch can make lock action more consistent.
The bezels cover the panel opening around the lock. Having white and grey options in the W10404050 kits gives a closer match for different washer finishes.
Techecook and Replizo serve the W11307244 and W10682535 family. Those washers use a 3-wire assembly rather than the 4-wire W10404050 connection.
Techecook has wider listed brand coverage and a 3-year warranty. Its listed brands include Whirlpool, Maytag, Kenmore, Crosley, Admiral, Amana, Inglis and Roper.
Replizo is a more focused single-assembly option for Amana, Whirlpool and Maytag models. It uses a panel-mount design with a plug-in connector.
We did not treat a higher pack count as proof of better quality. A single correct switch is worth more than several switches from the wrong family.
Compatibility comes first for every pick. The best option matches your washer by part family, wire count and model list.
| Product | Best for | Part number | Pack size | Compatible brands | Our score |
|---|---|---|---|---|---|
| SuperDi 10Pcs 3949247 Washer Lid Switch Fits | older 3949247 systems | 3949247 | 10 switches | Whirlpool and Kenmore | 9.7 |
| Blutoget Upgraded W10404050 W10238287 Washer Lid Lock | a complete W10404050 repair | Whirlpool, Maytag, Kenmore and Amana | 9.6 | ||
| M Motico UPGRADED W10404050 W10238287 Washer Lid Lock | W10404050 replacement coverage | Whirlpool, Maytag, Kenmore and Amana | 9.6 | ||
| Techecook 2026 Upgraded W11307244 W10682535 Washer Lid | 3-wire W11307244 systems | Whirlpool, Maytag, Kenmore, Crosley, Admiral, Amana, Inglis and Roper | 9.4 | ||
| Replizo W11307244 W10682535 Washer Lid Lock Switch | a focused W11307244 replacement | Amana, Whirlpool and Maytag | 9.3 |
What to check before buying a lid switch for a Whirlpool washing machine
The full washer model number is the most important check. Look for the model label on the washer cabinet, then compare that number with the compatible model information for the replacement.
Write the model number down exactly as it appears. A single digit difference can point to a different lid-lock design.
Next, compare the old part number. The products here fall into three main groups: SuperDi uses 3949247, Blutoget and M Motico use W10404050 and W10238287, and Techecook and Replizo use W11307244 and W10682535.
The old part number is usually on the switch itself or on a label near the mounting point. Photograph it before removal so the digits stay readable.
Wire count can separate similar-looking parts. The Techecook assembly is identified as a 3-wire switch, while the Blutoget assembly uses a 4-wire plug connection.
Count the wires on the old switch rather than guessing from its shape. The connector also matters because a matching wire count with a different plug will not work.
Do not assume that a similar shape means the wiring is interchangeable. Lid-lock systems can look alike while using different signals and mounting points.
Check whether the repair needs a lid strike or bezel. Blutoget and M Motico include the W10240513 strike and 2 bezels, while the Techecook and Replizo packages focus on the lid-lock assembly.
Look at the existing strike for cracks, bending or loose mounting holes. A new switch may still struggle if a worn strike fails to engage it properly.
Check the bezel area for damage around the panel opening. A split or warped bezel can leave a gap even when the switch itself is working.
If your washer has a drive problem rather than a lid-lock problem, compare the repair symptoms with the options in our best washer drive belt guide. A belt issue and a lid switch issue can both leave a washer unable to spin, but the replacement parts are different.
A drive belt problem often shows different sounds and movement during agitation. A lid-lock problem more often ties to the lid signal, lock light or a cycle that pauses after the lid closes.
Keep the old switch, strike and bezels until the new part is installed. That way you can compare each piece and return to the old part if a detail does not match.
How to install and care for a Whirlpool washer lid switch
Disconnect the washer from power before removing the old lid switch. M Motico also advises shutting off the water supply before installation, while Techecook advises using work gloves.
Photograph the old wiring and note how the connector and mounting points sit before removing anything. Keep screws and small parts together so they do not fall into the washer cabinet.
Use the instructions that come with the selected assembly. Blutoget and M Motico include instruction sheets, while the product data for SuperDi, Techecook and Replizo describes the replacement parts and general installation needs.
Do not force a connector into place. If the number of wires, plug shape, strike position or mounting holes differs from the old part, stop and recheck the model number and part family.
After installation, restore power and run an appropriate test cycle while staying nearby. The lid should close and lock as expected, and the washer should not spin with the lid open.
A washer's spin cycle removes water by turning the basket at high speed. Read how a washer spin cycle extracts water from your clothes if you want to understand why a lock fault can prevent water extraction.
Which Whirlpool lid switch should you choose?
Choose SuperDi if your washer matches the 3949247 family and you want a 10-pack. This is the pick for older Whirlpool and Kenmore top-load systems listed for that part number.
The extra switches can suit a household with more than one compatible washer. They can also suit a repair plan that wants a spare on hand.
Choose Blutoget or M Motico if your W10404050 repair needs the switch, lid strike and bezels together. Both kits use a 4-wire connection for matching systems.
Blutoget lists 730 days of after-sales service. M Motico lists a 1-year warranty, so compare the service terms you value for your repair.
Choose Techecook if your washer uses a 3-wire W11307244 or W10682535 assembly and you value its wider listed brand coverage and 3-year warranty. Its single assembly is a focused replacement for that part family.
Choose Replizo if your model matches the same part family and you want a focused single assembly. Its panel-mount design and plug-in connector should be compared with the old switch.
Do not choose between Techecook and Replizo based on brand preference alone. Compare the model list, connector and mounting points with your washer.
For more part matching help, see our guide to the best Whirlpool washing machine parts. That guide can help when the fault may sit outside the lid-lock system.
If your washer is a high-efficiency model, What Makes a Washer High Efficiency? HE Basics Explained explains how cycle design affects water use and operation.
High-efficiency washers often rely on a locked lid during spin for safety and water control. A lock fault can therefore stop the cycle before water extraction begins.
When comparing a best Kenmore washer lid switch or a best GE washing machine lid switch, use the same rule: match the full model number, part number, connector and mounting design before ordering.
That rule is especially important for Kenmore models built on a Whirlpool platform. The brand label may differ while the installed part family stays the same.
For GE models, do not transfer the Whirlpool part numbers in this roundup. A GE washer needs its own matching part family and connector.
The right choice is the part family already designed for your washer. Once that match is clear, the differences between these picks come down to included parts and service terms.
Our top 3 picks at a glance
-
1
Best for older 3949247 systems
SuperDi 10Pcs 3949247 Washer Lid Switch Fits
9.7/10 our score
See it on Amazon -
2
Best for a complete W10404050 repair
Blutoget Upgraded W10404050 W10238287 Washer Lid Lock
9.6/10 our score
See it on Amazon -
3
Best for W10404050 replacement coverage
M Motico UPGRADED W10404050 W10238287 Washer Lid Lock
9.6/10 our score
See it on Amazon
Frequently asked questions
How do I choose a Whirlpool washing machine lid switch?
Choose by the washer's full model number and the part number on the old switch. The 3949247 family differs from W10404050 and W11307244 systems, and the W11307244 options here also use a 3-wire assembly.
Unplug the washer before inspecting or replacing a lid switch.
What does a Whirlpool washer lid switch do?
A Whirlpool washer lid switch detects whether the lid is closed and helps prevent spinning or agitation while the lid is open. A failed switch can be linked with symptoms such as no start, no spin, no drain, a blinking lock light or a washer that stops during a cycle.
Other faults can cause similar symptoms, so confirm the model and repair diagnosis first.
Are W10404050 and W11307244 the same lid switch?
No. W10404050 and W11307244 are different part families in this roundup.
The W10404050 kits include a 4-wire switch, while the Techecook W11307244 assembly is identified as a 3-wire switch.
Match the part number, wire count and washer model before ordering.
Can I replace a Whirlpool washer lid switch myself?
You may be able to replace a Whirlpool washer lid switch with basic hand tools when the part matches your washer. Disconnect power before beginning, shut off the water supply when the instructions call for it, and follow the included instructions for the selected assembly.
Stop if the wiring or mounting points do not match.
Why will my Whirlpool washer not spin after the lid closes?
A lid switch or lid-lock problem can stop a Whirlpool washer from spinning after the lid closes, but it is not the only possible cause. Check the model-specific error code, lid strike, wiring and other symptoms before buying a replacement.
The Whirlpool Cabrio washer troubleshooting guide covers related checks.
