9 Best Kenmore Washer Suspension Rods (November 2026)

The best Kenmore washer suspension rods include the Beaquicy 【2026 UPGRADED】W10780048 WTW4800XQ4 WTW4800XQ1 RTW4640YQ1 ATW4675YQ1 for most W10780048 replacements, the Beaquicy 【ALLOY UPGRADED】W10780045 WTW4816FW2 NTW4516FW2 NTW4605EW0 NTW4516FW1 for longer W10780045 rods, and the Blutoget 2026 Updated W10780048 ATW4675YQ1 WTW4800XQ4 RTW4640YQ1 for broad W10780048 model coverage.

On this page (7 sections)

1. Which Kenmore washer suspension rods are best?
2. Best Kenmore washer suspension rods by fit and use
3. How do you choose suspension rods for a Kenmore washer?
4. W10780045 vs W10780048: what is the difference?
5. How do you install Kenmore washer suspension rods?
6. What should you do if the washer still shakes?
7. Final verdict on the best Kenmore washer suspension rods

The best Kenmore washer suspension rods for most compatible top-load washers are the Beaquicy W10780048 rods, scored 9.7 because they combine a complete 4-piece set, a clear 23.6 in length and broad listed Kenmore model coverage. Choose a W10780045 kit instead when your washer uses the longer 26.7 in rods.

Suspension rods support the washer tub and help control movement during spin. When the rods, balls or bushings wear or break, the washer may shake, bang, go out of balance or show an unbalanced-load error.

The most important buying step is matching the exact washer model and suspension part number. Kenmore washers can use different rod families, including W10780044, W10780045, W10780048 and W11130362.

Our picks at a glance

1. 1
   Best for most W10780048 replacements

   Beaquicy 【2026 UPGRADED】W10780048 WTW4800XQ4 WTW4800XQ1 RTW4640YQ1 ATW4675YQ1

   9.7/10 our score

   See it on Amazon
2. 2
   Best for longer W10780045 rods

   Beaquicy 【ALLOY UPGRADED】W10780045 WTW4816FW2 NTW4516FW2 NTW4605EW0 NTW4516FW1

   9.6/10 our score

   See it on Amazon
3. 3
   Best for broad W10780048 model coverage

   Blutoget 2026 Updated W10780048 ATW4675YQ1 WTW4800XQ4 RTW4640YQ1

   9.5/10 our score

   See it on Amazon

4. 4

   Techecook Updated W10780045 Washer Suspension Rods Kit

   Best for DIY W10780045 repairs
   Check it
5. 5

   APPLIANCEMATES W10780045 Washer Suspension Rods Kit

   Best for a simple W10780045 match
   Check it
6. 6

   Whirlpool W11130362 Washer Suspension Rod Kit Genuine

   Best for a genuine OEM replacement
   Check it
7. 7

   Cenipar W11400156 Suspension Rod Kit

   Best for newer listed Whirlpool and Maytag models
   Check it
8. 8

   AMI PARTS W10780048 Washer Suspension Rod Kit Fit

   Best for a basic W10780048 kit
   Check it
9. 9

   MIFLUS W10780044 W10555289 Washer Suspension Rods/Suspension Rod

   Best for W10780044 model matches
   Check it

Which Kenmore washer suspension rods are best?

Beaquicy W10780048 is the best starting point for a compatible Kenmore washer because it includes 4 rods, 4 suspension balls and 4 bushings. The complete set helps when the whole suspension needs attention rather than only one worn part.

Its rods are about 23.6 in long and the coverage includes several Kenmore model numbers. A rod that is too short or too long will not sit correctly in the mounting points.

Beaquicy W10780045 is the better fit for washers that use the longer 26.7 in rod assembly. That difference changes how the tub is supported during spin.

Blutoget gives another strong W10780048 option. Techecook and APPLIANCEMATES offer additional W10780045 choices for the longer design.

Our score weighs stated parts, length, material, model coverage and buyer feedback. It helps narrow the field but does not replace checking your exact model.

The model label should come first before any kit is put in a cart.

A symptom such as shaking or banging does not identify the right rod. A careful match avoids a return and gives the tub the support it was designed to have.

Suspension wear can build slowly, so a washer may seem settled on light loads and still move too much on heavier ones. Replacing matched parts together can make the result more even across all four points.

Best Kenmore washer suspension rods by fit and use

1. Beaquicy 【2026 UPGRADED】W10780048 WTW4800XQ4 WTW4800XQ1 RTW4640YQ1 ATW4675YQ1

1

Beaquicy 【2026 UPGRADED】W10780048 WTW4800XQ4 WTW4800XQ1 RTW4640YQ1 ATW4675YQ1: Best for most W10780048 replacements

9.7/10Our score

• 4 rods, 4 suspension balls and 4 bushings
• About 23.6 in long
• ABS plastic and silica gel construction
• Fits listed Kenmore, Whirlpool, Maytag, Admiral and related models

This 4-piece W10780048 kit covers several Kenmore model numbers and includes the matching suspension balls and bushings. It is the strongest general choice when your original rods match the W10780048 family.

See it on Amazon

Pros

• Complete 4-piece replacement set
• Broad listed model coverage
• Includes suspension balls and bushings

Cons

• Requires exact model verification
• Not the correct length for every Kenmore washer

Beaquicy's W10780048 kit is the strongest general pick for a compatible Kenmore top-load washer. The package includes 4 rods, 4 suspension balls and 4 bushings for a complete suspension replacement.

The rods are about 23.6 in long, so measure the original assembly and compare the hook points before you order.

The set uses ABS plastic and silica gel construction. The listed part family includes W10257087, W10257088, W10748952 and W10780048.

The listed Kenmore coverage includes 110.20232710, 110.20022014 and 110.20022013. Beaquicy also lists Whirlpool, Maytag, Admiral, Amana, Crosley and Roper applications.

That range suits many top load washers built on shared platforms. A brand name alone is not enough, since only some models in each family use this exact length.

Choose this kit when your model and original rod match the W10780048 family. If the rods are about 26.7 in, use a W10780045 option instead.

For setup, turn off power and water before opening the cabinet and wear gloves. Keep the old parts beside the new ones until each mounting point is checked.

2. Beaquicy 【ALLOY UPGRADED】W10780045 WTW4816FW2 NTW4516FW2 NTW4605EW0 NTW4516FW1

2

Beaquicy 【ALLOY UPGRADED】W10780045 WTW4816FW2 NTW4516FW2 NTW4605EW0 NTW4516FW1: Best for longer W10780045 rods

9.6/10Our score

• 4 rods, 4 suspension balls and 4 ball housings
• About 26.7 in long
• Stainless steel and plastic construction
• Fits listed Kenmore, Whirlpool, Amana, Roper and related models

This W10780045 set is aimed at washers that use the longer 26.7 in rod assembly. Its complete four-rod package suits a full suspension replacement when the model and length match.

See it on Amazon

Pros

• Longer rod size is clearly stated
• Complete replacement hardware
• Wide listed model coverage

Cons

• Not interchangeable with shorter W10780048 rods
• Exact washer model still needs checking

This Beaquicy kit is best for Kenmore washers that use the W10780045 suspension rod family. It includes 4 W10780045 rods, 4 suspension balls and 4 suspension ball housings.

The assemblies are about 26.7 in long, making them longer than the W10780048 options in this roundup. That extra length reflects a different cabinet and tub arrangement, not a stronger version of the shorter rod.

The material is described as stainless steel and plastic, with a finish that combines stainless steel and plastic. In a damp laundry space, that mix is meant to resist rust and keep the spring action consistent.

Listed Kenmore examples include 11023102310, 11022532511, 11020022012 and 11020232711. The coverage also includes selected Whirlpool, Amana, Crosley, Inglis and Roper models.

This is the right direction when your original rods measure about 26.7 in and your model matches the W10780045 list. Don't use the length alone as proof of fit because mounting points and model numbers also matter.

The complete package suits a full set replacement when balls or housings show wear. Replacing only the visible rod can leave a weak companion part to fail later.

Before ordering, compare the part number on the old rod and the full washer model. A short check at that stage saves trouble during installation.

The honest limit is that this kit will not work for a washer designed around the 23.6 in family. Confirming the family first keeps the repair simple.

3. Blutoget 2026 Updated W10780048 ATW4675YQ1 WTW4800XQ4 RTW4640YQ1

3

Blutoget 2026 Updated W10780048 ATW4675YQ1 WTW4800XQ4 RTW4640YQ1: Best for broad W10780048 model coverage

9.5/10Our score

• 4 rods, 4 suspension balls and 4 bushings
• About 23.6 in long
• Stainless steel, ABS and rubber construction
• Fits listed Kenmore, Whirlpool, Maytag, Amana, Roper and Admiral models

Blutoget gives another complete option for the W10780048 family, with model numbers spanning several Kenmore and related washer brands. Choose it when your model cross-check points to this part family.

See it on Amazon

Pros

• Complete four-rod kit
• Clear 23.6 in length
• Many listed model families

Cons

• Long model list makes verification important
• Not intended for W10780045-length washers

Blutoget is another strong choice for the W10780048 and W10257088 part families. Its package contains 4 rods, 4 suspension balls and 4 bushings, with a stated rod length of 23.6 in.

The rods use stainless steel metal, ABS and rubber, with a hook style for replacement. Each end still needs to seat fully before the tub is loaded.

Blutoget lists Kenmore models such as 110.20022012, 110.20222510, 110.5142511, 110.5072010 and 110.20022014. Those examples show why the full model number matters more than the Kenmore name alone.

The same part family is also listed for Whirlpool, Maytag, Amana, Roper and Admiral models. That broad list can help when cross-checking a Kenmore washer with a Whirlpool-built platform.

Choose Blutoget when the part number and 23.6 in length match your washer. A brand match alone does not confirm compatibility.

This kit suits a DIY user who is comfortable following a video and the washer service guidance. Have a Phillips screwdriver, duct tape and gloves ready before the cabinet is opened.

The long compatibility list can be hard to read quickly. Search for the exact model string rather than relying on a general match.

4. Techecook Updated W10780045 Washer Suspension Rods Kit

4

Techecook Updated W10780045 Washer Suspension Rods Kit: Best for DIY W10780045 repairs

9.4/10Our score

• 4 rods, 4 suspension balls and 4 ball housings
• About 26.7 in long
• Stainless steel and ABS plastic
• Top-load application

Techecook is a practical W10780045 choice for a full top-load suspension replacement. The 26.7 in measurement is the key fit detail to compare with the original rods.

See it on Amazon

Pros

• Complete set for all four suspension points
• Length is stated clearly
• Stainless steel and ABS plastic

Cons

• Only fits washers using the W10780045 family
• Model matching remains necessary

Techecook suits a DIY repair using the W10780045 family. It includes 4 suspension rods, 4 suspension balls and 4 suspension ball housings, with assemblies about 26.7 in long.

The rods are made from stainless steel and ABS plastic. That combination is described as strong and resistant, with a design intended to prevent rust and extend service life.

Techecook lists Kenmore, Whirlpool, Amana, Crosley, Maytag, Admiral, Inglis and Roper applications, including Kenmore model 11020102310. The model list is the best place to start when the original part number is hard to read.

The set is aimed at top-load washer use and acts as a shock absorber that supports the tub during unbalanced conditions. That makes it relevant when the washer vibrates or shakes during rinse and spin.

Choose it when your original rods measure about 26.7 in and your model appears in the compatibility group. If the washer uses W10780048, select one of the shorter 23.6 in kits instead.

For care, disconnect power and water and wear gloves before starting. Lay the rods out in order so each ball and housing stays with its matching assembly.

The kit depends on a precise length match. A washer that looks similar on the outside may still use the shorter family inside.

5. APPLIANCEMATES W10780045 Washer Suspension Rods Kit

5

APPLIANCEMATES W10780045 Washer Suspension Rods Kit: Best for a simple W10780045 match

9.3/10Our score

• 4 rods, 4 suspension balls and 4 bushings
• Stainless steel construction
• Listed Amana, Whirlpool, Kenmore, Crosley, Inglis and Roper models
• Replaces listed W10780045 family parts

APPLIANCEMATES keeps the choice focused on the W10780045 part family and includes the four rods plus their related hardware. It suits shoppers who have already confirmed the part number.

See it on Amazon

Pros

• Straightforward four-rod kit
• Stainless steel construction
• Several listed Kenmore model numbers

Cons

• Rod length should be compared before ordering
• Compatibility depends on the exact model

APPLIANCEMATES keeps the choice simple for a confirmed W10780045 repair. The package contains 4 suspension rods, 4 suspension balls and 4 bushings.

The rods are made from stainless steel, and the listed Kenmore coverage includes 11020102310. Other listed brands include Amana, Whirlpool, Crosley, Inglis and Roper.

This kit is useful when you already have the correct W10780045 part number and want all four suspension points replaced together. That can suit a washer where one rod broke and the others are old or worn.

Compare the original rod length before ordering because the data does not state a rod length. Without that measurement, a shopper has to rely only on the part number and model list.

Choose APPLIANCEMATES for a straightforward W10780045 match. If you are still identifying the washer part, start with the model label and the original rod measurement.

The stainless steel construction is a plus for a part that lives around water and detergent. It does not remove the need to check the ball and bushing fit at each mounting point.

Set up is simpler when the washer is pulled forward and the old rods are compared side by side. Note which way each hook faces before removing the first one.

The limit here is the missing length detail in the listing. Measure first, then order, and the choice becomes much clearer.

6. Whirlpool W11130362 Washer Suspension Rod Kit Genuine

6

Whirlpool W11130362 Washer Suspension Rod Kit Genuine: Best for a genuine OEM replacement

9.3/10Our score

• Genuine Whirlpool OEM part
• Single washer suspension rod kit
• Compatible with listed Maytag, Kenmore and Whirlpool models
• Manufacturer substitution for listed prior parts

This Whirlpool kit is the OEM-focused option in the group. It makes the most sense when your washer's parts diagram or model support identifies W11130362 or one of its listed substitutions.

See it on Amazon

Pros

• Genuine Whirlpool part
• Clear compatible model list
• Useful for OEM-focused repairs

Cons

• Package is described as a single kit
• Model-specific fit must be confirmed

Whirlpool's W11130362 is the OEM-focused choice in this group. It is described as a genuine Whirlpool replacement part and is compatible with listed Maytag, Kenmore and Whirlpool washers.

The kit is a single W11130362 washer suspension rod kit, and the data identifies it as a multiple-parts set without giving a complete item-by-item package list. Use the washer's parts diagram to confirm what the repair requires.

Listed Kenmore compatibility includes 11025132410 and 11025132411. The part also fits selected Maytag and Whirlpool models such as MVWC555DW0, WTW5000DW2 and MVWX655DW1.

Choose this option when your model identifies W11130362 or one of its listed substitutions. It is a better fit for OEM-focused repairs than for shoppers who simply need a broad aftermarket cross-reference.

The listed substitutions include W11027174, W10780040, W10735786, W10594080, W10748956, W10821710, W11033491 and W11228718. That list can help when an older diagram uses a previous part number.

For daily use, the appeal is a part tied directly to the washer maker. That may matter to a household that prefers genuine components for a long term repair.

The trade off is the package description, since the exact contents are less detailed than a four rod kit. Check the parts diagram and model support before ordering.

When W11130362 is confirmed, this is the most direct OEM path in the roundup.

7. Cenipar W11400156 Suspension Rod Kit

7

Cenipar W11400156 Suspension Rod Kit: Best for newer listed Whirlpool and Maytag models

9.0/10Our score

• 4-piece suspension rod kit
• Fits listed Whirlpool and Maytag models
• W11400156 part number
• Replaces listed W11187091 family parts

Cenipar targets a different part family from the W10780045 and W10780048 kits. Choose it only when your Whirlpool or Maytag model appears in the listed W11400156 coverage.

See it on Amazon

Pros

• Four-piece package
• Targets newer listed model families
• Clear replacement part number

Cons

• Not a general Kenmore W10780045 or W10780048 kit
• Exact model matching is essential

Cenipar targets a different group of washers with its W11400156 4-piece kit. The listed coverage includes selected Whirlpool and Maytag models, such as WTW7120HW0, WTW8127LC0 and MVW7232HW0.

The kit replaces listed W11187091 family parts, including 4962542, AP6976426, PS12731247 and EAP12731247. That makes the replacement part number more important than the Kenmore keyword used in this roundup.

Choose Cenipar only when your exact washer model matches the listed W11400156 coverage. It is not a general substitute for W10780045 or W10780048 rods.

This option makes sense for newer listed Whirlpool and Maytag platforms that use the W11400156 family. Check the model label and parts diagram before selecting it for a Kenmore washer.

The four piece format suits a complete suspension refresh on a matching machine. It can help when shaking, banging or an unbalanced condition points to worn suspension parts.

For set up, treat the model check as part of the repair, not as an afterthought. Open the lid area and control panel area for the label, then compare the full string.

The honest trade off is narrow fit. A Kenmore washer that uses W10780044, W10780045 or W10780048 will need a different family.

When the W11400156 number is already confirmed, this kit is a focused choice.

8. AMI PARTS W10780048 Washer Suspension Rod Kit Fit

8

AMI PARTS W10780048 Washer Suspension Rod Kit Fit: Best for a basic W10780048 kit

8.8/10Our score

• 4 rods, 4 suspension balls and 4 bushings
• About 23.6 in long
• W10780048 part family
• Fits listed Kenmore and Whirlpool applications

AMI PARTS offers the same core W10780048 format as other short-rod choices here. Its clear 23.6 in length helps you compare the replacement with the rods already in your washer.

See it on Amazon

Pros

• Complete four-rod kit
• Length is stated clearly
• Includes balls and bushings

Cons

• Listed compatibility still needs checking
• Not designed for the longer W10780045 size

AMI PARTS offers a basic W10780048 replacement with 4 rods, 4 suspension balls and 4 suspension ball housings. The rods are about 23.6 in long and are intended for listed Kenmore and Whirlpool applications.

The part numbers include W10257088, W10349193, W10748952, W10780048, AP5971398, W10349191, PS11703290 and W10257087. The listed fit includes WTW4800XQ4, WTW4800XQ1 and ATW4675YQ1.

Use this kit when your original rods match the W10780048 length and part family. The complete package can be useful if the balls or bushings also need replacement rather than only one rod.

AMI PARTS is a reasonable choice for a standard short-rod repair. Compare the model number and mounting arrangement before ordering, especially if your Kenmore washer uses W10780045.

The basic format suits a household that wants the core parts without extra items. It is also a good fit when the old balls or housings are cracked, worn or missing.

For installation, disconnect power before touching the suspension and wear gloves for the metal edges. Keep the four assemblies separate until you know which corner each one serves.

The trade off is that basic does not mean universal. The 23.6 in size must match the washer, and the mounting points must line up.

When those details match, this kit gives a simple route back to steadier spin cycles.

9. MIFLUS W10780044 W10555289 Washer Suspension Rods/Suspension Rod

9

MIFLUS W10780044 W10555289 Washer Suspension Rods/Suspension Rod: Best for W10780044 model matches

8.0/10Our score

• 4 rods, bushings and suspension balls
• About 24 in long
• Fits listed Whirlpool, Maytag, Kenmore, Crosley, Amana and Inglis models
• Stainless steel rods with upgraded springs

MIFLUS covers the W10780044 and W10555289 family, which is different from the two common W10780048 and W10780045 groups above. It is worth considering when your exact Kenmore model confirms this part number.

See it on Amazon

Pros

• Targets a separate part family
• Four-rod replacement kit
• Broad listed model coverage

Cons

• Only many reviews are shown in the data, so buyer feedback is limited
• Exact model matching is critical

MIFLUS is the right family to check when your washer uses W10780044 or W10555289. The kit includes 4 suspension rods, bushings and suspension balls, with a stated length of about 24 in.

The listed compatibility includes selected Whirlpool, Maytag, Kenmore, Crosley, Amana and Inglis models. Kenmore examples include 11021492310, 11021492311, 11022242510 and 11022342512.

The rods use stainless steel and upgraded springs. MIFLUS describes the suspension assembly as supporting the tub and reducing movement during washing and spin.

This kit should not be treated as a replacement for every Kenmore suspension rod. Choose it only after confirming the W10780044 or W10555289 family against your model and original parts.

The 24 in length sits close to the 23.6 in W10780048 size, which can cause confusion. That closeness is exactly why the part number and model list need a careful check.

For a matching washer, the four rod set suits a full suspension renewal. New balls and bushings can be fitted at the same time instead of leaving older small parts in place.

Set up still starts with power and water off and gloves on. Compare each new rod with the old one before the cabinet is closed.

The trade off is a specific family rather than a general fix. When W10780044 is confirmed, the fit is clear and focused.

How do you choose suspension rods for a Kenmore washer?

Choose suspension rods by the washer's full model number, the replacement part number and the original rod length. The most common choices in this guide are the 23.6 in W10780048 family and the 26.7 in W10780045 family, but W10780044 and W11130362 also appear in specific model groups.

Find the model label inside the washer lid area, around the control panel or in another manufacturer-specified location. Compare that model with the compatibility list for the kit.

Measure the original rod if the part number is unclear. A similar brand name or a similar-looking rod does not prove that the spring, ball and housing will fit.

If the washer is also failing to lock the lid, check our guide to the best Kenmore washer lid switch before ordering suspension parts. A lid-switch problem and a balance problem can produce different symptoms.

W10780045 vs W10780048: what is the difference?

W10780045 rods are about 26.7 in long, while W10780048 rods are about 23.6 in long. The two families also cover different washer model groups, so the part number and model match matter more than the small difference in product names.

W10780045 kits include rods, suspension balls and ball housings or bushings. W10780048 kits include rods, suspension balls and bushings.

The length gap of about three inches changes how the tub hangs in the cabinet. A rod that is too long or short can change spring tension and the way the tub moves during spin.

A visual match is not enough on its own. Two rods can look alike at a glance while belonging to different model groups with different mounting points.

Start with the washer model label and the original part number when either one is readable. If the number is worn, measure the old rod and compare the full model against the compatibility list.

W10780045 washers often appear with models such as NTW4516FW1, WTW4816FW2 and 11020102310. W10780048 washers often appear with WTW4800XQ4, ATW4675YQ1 and 110.20022013.

Those examples are only a starting point. Search the exact model string in the list for the kit you plan to buy.

Material details can differ, with some kits using stainless steel and plastic and others using ABS and silica gel. Material does not fix a wrong length, so it should come after fit in your decision.

If your washer uses a drive belt as part of a separate repair, compare the best washer drive belt options after identifying the belt number. Suspension rods and drive belts address different washer components.

How do you install Kenmore washer suspension rods?

Turn off the washer's power and water supply before starting, and use work gloves. The supplied product information commonly identifies a Phillips screwdriver, putty knife, duct tape and a strap as installation tools for the W10780048 family.

Replace the suspension parts according to the washer's service instructions. Keep the rods, balls and bushings organized so the new pieces go into the correct mounting points.

Don't order based only on a vibration symptom. A weak floor, incorrect leveling, shipping bolts or another broken washer part can also contribute to shaking, so inspect the appliance before replacing the rods.

After the repair, run a small test load and watch the washer during spin. Stop if the tub moves abnormally or the washer makes a new noise.

For care questions, see our guide on how to grease washer suspension rods. Use only a method that matches the washer manufacturer's service guidance.

What should you do if the washer still shakes?

If the washer still shakes after a rod replacement, check leveling, floor strength, load distribution and the exact part fit. The W10780048 product information specifically identifies leveling legs, weak flooring, shipping bolts and another broken washer part as possible contributors.

Run the washer with a balanced load rather than a single heavy item. Spread clothes around the tub so one side does not carry most of the weight during spin.

If the tub still bangs or the washer cannot reach spin, pause the machine and inspect the suspension mounting points. Look for a rod that is not seated, a ball that is out of place or a housing fitted in the wrong position.

Check the leveling legs next, since a washer that rocks on the floor can shake even with good rods. Use a level on the cabinet and adjust the legs according to the washer guidance.

Weak flooring can also let a washer walk or vibrate, especially on an upper floor or a soft subfloor. Moving the machine or steadying the floor may matter as much as the part itself.

Shipping bolts should be removed if they are still in place, because they can stop the tub from moving as designed. The same check applies after a move or a new installation.

Another broken washer part can mimic a suspension problem, so do not keep forcing the cycle. Stop, unplug the machine and inspect the area around the tub and mounting points.

A different washer brand may use a different rod family. If you are repairing a GE washer, compare the best GE washer suspension rods instead of assuming a Kenmore cross-reference will fit.

If the model number was wrong, compare the old rods and new rods again for length and mounting shape. A mismatch can leave the tub unsupported even when the kit looks complete.

Final verdict on the best Kenmore washer suspension rods

The Beaquicy W10780048 kit is the best overall choice when your Kenmore washer uses the 23.6 in W10780048 family. Pick the Beaquicy W10780045 or Techecook kit when your model requires the longer 26.7 in rods.

Choose Whirlpool W11130362 for a confirmed OEM repair, Cenipar for its listed W11400156 Whirlpool and Maytag models, and MIFLUS when your washer matches W10780044 or W10555289. The correct part number and model match should decide the purchase before brand or score.

Blutoget and AMI PARTS give more options inside the W10780048 group when their model lists fit your machine. APPLIANCEMATES gives another W10780045 option when that part number is already confirmed.

That wider set of choices is useful, yet it can also make a quick purchase risky. The safest order is model label first, part number second and length third.

Fit first, brand second is the rule that keeps this repair straightforward.

For households with a confirmed number, any of these kits can be a practical path depending on the family. For households still unsure, pausing to check the label is worth more than ordering fast.

A steady spin cycle starts with the right support under the tub. Once the family is matched, the rest of the repair becomes much easier to plan.

Our top 3 picks at a glance

1. 1
   Best for most W10780048 replacements

   Beaquicy 【2026 UPGRADED】W10780048 WTW4800XQ4 WTW4800XQ1 RTW4640YQ1 ATW4675YQ1

   9.7/10 our score

   See it on Amazon
2. 2
   Best for longer W10780045 rods

   Beaquicy 【ALLOY UPGRADED】W10780045 WTW4816FW2 NTW4516FW2 NTW4605EW0 NTW4516FW1

   9.6/10 our score

   See it on Amazon
3. 3
   Best for broad W10780048 model coverage

   Blutoget 2026 Updated W10780048 ATW4675YQ1 WTW4800XQ4 RTW4640YQ1

   9.5/10 our score

   See it on Amazon

Frequently asked questions

What are the best suspension rods for a Kenmore washer?

The best choice depends on the washer model. Beaquicy W10780048 is the strongest general pick for compatible washers using rods about 23.6 in long.

Beaquicy W10780045 and Techecook suit models using rods about 26.7 in long.

Confirm the full model number and part family before ordering.

How do I know which suspension rods fit my Kenmore washer?

Check the full model number on the washer label, then compare it with the kit's compatibility list. Also compare the original part number and rod length.

W10780048 kits here are about 23.6 in, while W10780045 kits are about 26.7 in.

Can I replace only one Kenmore washer suspension rod?

A single broken rod may be the visible problem, but the products in this guide are mainly complete kits with 4 rods and related hardware. Replacing the set can keep the suspension parts matched, but follow the washer's service guidance and inspect the other components before starting.

Why does my Kenmore washer shake during spin?

A broken or worn suspension rod can let the tub move too far during spin. Other possible causes include an unbalanced load, poor leveling, weak flooring, shipping bolts or another broken washer part.

Check those conditions before assuming the rods are the only cause.