5 Best Kenmore Washer Lid Switch (November 2026)
The best Kenmore washer lid switches include the M Motico UPGRADED W10404050 W10238287 Washer Lid Lock for complete W10404050 repairs, the W11307244 W10682535 Washer Lid Lock Switch Compatible for W11307244 coverage, and the Techecook 2026 Upgraded W11307244 W10682535 Washer Lid for 3-wire W11307244 locks.
On this page (5 sections)
The best Kenmore washer lid switch depends on the part number already used by your washer. A correct match matters more than the brand name on the box or the shape in a listing photo.
Kenmore washers use several unrelated lid switch families. A 3949247 switch, a W10404050 lock assembly and a W11307244 lock assembly do not swap between machines.
Start with the model label on your washer. The full model number tells you which family to look for, and the number printed on the old switch gives you a second check.
Connector shape and mounting points also matter. A part close in size can still fail to sit flat, latch cleanly or connect without forcing the harness.
SuperDi is the top choice for compatible 3949247 repairs because that pack is made for that family. M Motico and Techecook cover common W10404050 and W11307244 families, but only for the models they list.
If you have a W10404050 machine, a kit with a strike and bezels can make sense. If you have a W11307244 machine, a single lock assembly may be all you need.
Separate one fault from another before you order. If the washer also has drive problems, compare the best washer drive belt options before assuming the lid switch is the only failed part.
For front-load machines, a best front load washer bearing guide covers a different repair. Top-load lid locks and front-load bearings solve different problems.
Keep the old part number, model number and a photo of the connector handy. Those three details answer most compatibility questions before checkout.
When in doubt, stop and recheck the numbers. A lid switch only helps if the washer can recognise it, lock with it and run a cycle with it in place.
Our picks at a glance
-
1
Best for complete W10404050 repairsM Motico UPGRADED W10404050 W10238287 Washer Lid Lock
9.6/10 our score
See it on Amazon -
2
Best for W11307244 coverageW11307244 W10682535 Washer Lid Lock Switch Compatible
9.5/10 our score
See it on Amazon -
3
Best for 3-wire W11307244 locksTechecook 2026 Upgraded W11307244 W10682535 Washer Lid
9.4/10 our score
See it on Amazon
- 4
Check itSuperDi 10Pcs 3949247 Washer Lid Switch Fits
Best for 3949247 multi-pack repairs - 5
Check itZNTVW W10404050 W10238287 Washer Lid Lock Latch
Best for harness-kit replacement
The best Kenmore washer lid switch replacements
The right replacement is the one that matches your washer's part family and connector. These picks cover 3949247, W10404050, W10238287, W11307244 and W10682535 assemblies.
Our score weighs specs, features and buyer feedback against what you're shopping for. We compared the stated compatibility, included pieces, replacement numbers, installation notes and warranty terms.
M Motico UPGRADED W10404050 W10238287 Washer Lid Lock: Best for complete W10404050 repairs
- W10404050 assembly
- W10240513 strike
- White and grey bezels
- Instruction sheet
- 1-year warranty
This kit includes the lock assembly, door strike, two bezels and instructions for compatible Whirlpool, Maytag and Kenmore top-load washers.
Pros
- Includes the strike and two bezels
- Many replacement part numbers
- 1-year warranty
Cons
- Compatibility is model-specific
- Part fit should be checked before installation
The M Motico W10404050 assembly is the best complete repair kit when your Kenmore washer uses the W10404050 or W10238287 family. It includes 1 lid-lock assembly, 1 W10240513 strike, 1 white bezel, 1 grey bezel and 1 instruction sheet.
The strike attaches to the washer door and activates the switch when the lid closes. The two bezels give you a choice between white and grey panel trim, which can help when the original opening needs a matching surround.
This assembly replaces W10238287, W10404050VP, W10744659, AP5263307 and other stated part numbers. It is compatible with some Whirlpool, Maytag, Amana and Kenmore 110 series top-load electronic washers.
The fit is model-specific, even within the same brand. Check the washer model before ordering, especially if the old part has a different connector or mounting layout.
Choose this kit when you need both the latch assembly and strike. Its 1-year warranty adds a defined coverage period for this pick.
W11307244 W10682535 Washer Lid Lock Switch Compatible: Best for W11307244 coverage
- W11307244 and W10682535 fit
- PBT and ABS materials
- 3-year warranty
- Multiple compatible brands
The M Motico W11307244 assembly suits compatible Kenmore models that use the W11307244 or W10682535 part family.
Pros
- 3-year warranty
- Clear replacement part family
- PBT and ABS construction
Cons
- Only 1 assembly included
- Not compatible with every model in the listed brands
The M Motico W11307244 assembly is the best fit for a compatible Kenmore washer that uses W11307244 or W10682535. It is a single replacement assembly with a 3-year warranty.
The part replaces W10682535, W10838613, W11253733, 4920959, AP6832601 and PS12704713 among the stated numbers. Compatibility includes some Whirlpool, Maytag, Kenmore, Crosley, Amana, Inglis and Roper washers.
M Motico identifies PBT and ABS materials for the assembly. The product information also describes a bendable ABS section that protects the wire harness, but that does not remove the need to match the washer model.
This is a better choice than a W10404050 kit when your original lock carries the W11307244 or W10682535 number. It can address locking issues, failure to start, a lid that will not close, a cycle that will not advance, agitation problems and spinning issues when the lock is the cause.
Unplug the washer and shut off the water supply before installation. Wear work gloves when handling the old assembly.
Techecook 2026 Upgraded W11307244 W10682535 Washer Lid: Best for 3-wire W11307244 locks
- W11307244 and W10682535 fit
- 3-wire assembly
- ABS and PBT materials
- 3-year warranty
This Techecook assembly is aimed at compatible Kenmore Series 110, 200 and 500 washers using a 3-wire W11307244 or W10682535 lock.
Pros
- 3-wire design is stated clearly
- 3-year warranty
- Broad model and brand coverage
Cons
- Wire count must match
- Only 1 assembly included
The Techecook W11307244 assembly is best for buyers who need a clearly stated 3-wire lock for a compatible Kenmore washer. It includes 1 W11307244/W10682535 washer lid-lock switch assembly.
The assembly is compatible with some Whirlpool, Maytag, Kenmore, Crosley, Admiral, Amana, Inglis and Roper washers. Its stated Kenmore coverage includes Series 110, 200 and 500 models, along with specific model numbers.
Techecook identifies ABS and high-temperature-resistant PBT materials. The assembly is rated at 120 volts, and the package contains one lock rather than a bezel set or separate strike.
Wire count matters here in a practical way. Compare the old lock and its three wires with the replacement before you buy, because a similar part with a different connector may not install correctly.
The part replaces W10682535, W10838613, W11253733 and other listed numbers. It also carries a 3-year warranty, which gives this single assembly a defined coverage period.
This suits a household that has already confirmed the W11307244 family and wants a direct replacement. It is less suited to a repair where a strike, bezel or extra trim piece is also worn.
The bendable section described for this style can help protect the wire harness through repeated lid movement. That design detail matters over time, since harness strain is a common point of wear around moving lids.
Set-up still needs care even when the part number matches. Unplug the washer, shut off the water supply and keep the work area clear before you remove the old lock.
Care after fitting is simple. Close the lid fully, let the lock engage on its own and watch the first cycle for normal locking and advancing.
Do not force the lock if it feels stuck after fitting. A stuck lock can sometimes be released by following the maker notes for the protruding tab, but repeated forcing can damage the new part.
SuperDi 10Pcs 3949247 Washer Lid Switch Fits: Best for 3949247 multi-pack repairs
- 10 switches
- 3949247 part family
- Whirlpool and Kenmore compatibility
- Long model list
The SuperDi 10-pack fits compatible Whirlpool and Kenmore washers that use the 3949247 part family, including many Kenmore Series 110 models.
Pros
- 10 switches in one pack
- Several replacement part numbers
- Broad stated Kenmore model coverage
Cons
- Only for the 3949247 family
- A multi-pack may be more than one repair needs
The SuperDi 3949247 switch is the best choice when your Kenmore washer uses the 3949247 part family. This is a 10-pack, so it suits a repair shop, property owner or household that wants matching replacements for more than one compatible washer.
The pack uses the 3949247 model and part number. It also lists 3949237, 3949247VP, 3949247V, AP5983746, PS11722098 and PS350434 as replacement numbers.
Compatibility includes Whirlpool and Kenmore washing machines, with a long list of Kenmore Series 110 models. The stated symptoms include a washer that will not drain, a timer that will not advance, a machine that will not run, or a washer that pumps but will not spin.
A multi-pack is useful only if the part matches your machine. It does not substitute for checking the full model number, since Kenmore washers use several unrelated lid-switch families.
The package style is 10-pack, and each switch is identified as white. Use a screwdriver and follow the installation steps for your washer's layout.
ZNTVW W10404050 W10238287 Washer Lid Lock Latch: Best for harness-kit replacement
- W10404050 and W10238287 fit
- Lock latch and harness kit
- White and grey bezels
- Instruction sheet
The ZNTVW kit combines a W10404050 or W10238287 latch with two bezels and instructions for compatible top-load washers.
Pros
- Includes two bezel colors
- Instruction sheet included
- Several replacement numbers
Cons
- Fit varies by washer model
- The plug must match your machine
The ZNTVW W10404050 kit is best for a compatible washer where you want a latch, two bezel colors and instructions together. It covers W10404050 and W10238287 replacement numbers and includes 1 latch, 1 white bezel, 1 grey bezel and 1 instruction sheet.
The kit is compatible with selected Whirlpool, Maytag, Kenmore, Amana and Crosley models. ZNTVW lists models such as 11020022010, 7MWTW5700YW2, WTW4910XQ3, NTW4501XQ0 and several others.
This assembly can suit symptoms such as a washer that will not spin or cycle, will not lock or open, will not start or will not agitate. Those symptoms can have other causes, so diagnose the washer before replacing a part.
The plug must match your machine. ZNTVW notes that some models use different plug shapes and describes trimming excess plastic only as a compatibility step shown in its instructions.
Do not modify a connector unless you understand the wiring and the replacement instructions support it.
Choose this kit when the bezel colors matter or when you want an instruction sheet with the latch. The product information does not state a warranty period.
How to match a lid switch for a Kenmore washer
The exact washer model is the first check because Kenmore branding covers several part families. Look for the model label on the cabinet, then compare that number with the compatible models for the replacement.
That model number is more reliable than the series name alone. Series 110, 200 and 500 groups include many variants, and two machines in the same group can use different locks.
Next, compare the old part number. A 3949247 switch is not the same fit as a W10404050 lock, and neither should be treated as a substitute for W11307244 without a confirmed match.
Connector shape and wire count are also useful checks. The Techecook W11307244 assembly is identified as a 3-wire part, while the W10404050 kits use their own assembly and strike arrangement.
Mounting shape deserves the same attention. Check the bracket, the opening in the lid panel and the way the strike meets the lock, since a small mismatch can stop the lid from closing cleanly.
Photos help at this stage. A clear photo of the old switch, its plug and its mounting tabs makes it easier to compare with a listing before you order.
If the old part is damaged, the model label is your main guide. Use the full washer model number and search that number with the part family you want to confirm.
The best Whirlpool washing machine lid switch guide can help if your washer uses Whirlpool parts under a Kenmore label. Many Kenmore top-loaders share design roots with Whirlpool, but the part number still decides the fit.
For another brand, see the best GE washing machine lid switch guide. GE locks use different families again, so do not carry a Kenmore match across brands by assumption.
Keep a simple routine. Model number first, old part number second, then connector, wire count and mounting shape.
If any check fails, pause.
What symptoms can a Kenmore lid switch cause?
A failed lid switch or lock can stop a washer from starting, spinning, agitating or advancing through a cycle. It can also cause a blinking lock light, repeated clicking, or a lid that will not stay closed.
A lid that will not close or will not open can point to the same fault group. The lock may be stuck, or the strike may no longer trigger the switch when the lid comes down.
These symptoms do not prove the switch is bad. A loose harness, bent strike or worn lid can cause the same start or spin problem.
A washer that will not drain may need a different repair. The SuperDi 3949247 data lists draining among its symptoms, but draining also involves the pump and drain path.
If the washer shakes or moves, the problem may involve suspension rather than the lid lock. Our guide to best Kenmore washer suspension rods covers that separate repair.
Suspension trouble usually shows as banging, walking or an uneven spin. A lid lock cannot steady a tub that is bouncing on worn rods.
Timing helps narrow the fault. A washer that fills and then stops often fits a lock problem, while shaking at spin often points elsewhere.
Repeated clicks with no lock light can mean the strike and switch are not meeting properly. If the lid sits crooked or the strike misses the lock, a new switch alone may not fix it.
Close the lid and note whether the lock light, clicking or stopping happens at the same stage each time. Replace the lock with the exact part family when the evidence points there.
How to replace a Kenmore washer lid switch safely
Start by unplugging the washer and shutting off the water supply. Keep the washer empty, use a suitable screwdriver and photograph the wiring before disconnecting anything.
That photo records the harness route, the clip position and the way the old lock sat in the panel.
Follow the assembly instructions and your washer service steps. The ZNTVW instructions describe removing the rear panel, disconnecting the harness and retaining clip, securing the lid with tape, lifting the main top and replacing the old lock.
Work in that order and keep screws in a small tray. Top panels can be heavy, so support the main top safely and do not let it drop onto the harness.
Do not force a connector or use a replacement with a different wire count. If the mounting points, bezel opening or plug do not match, stop and recheck the model and part number.
Forcing a plug can bend pins or crack the housing. A mismatch is a signal to recheck the part family, not a problem to push through.
If your kit includes bezels, choose the colour that matches the panel opening. The bezel affects how the lock sits and how the repair looks in daily use.
After installation, run an empty cycle while watching for proper locking and normal cycle movement. Keep hands away from moving parts, and do not bypass the lid lock for normal use.
If the lock light still flashes or the lid will not stay closed, power down and recheck the strike alignment. A loose or bent strike can prevent a good switch from engaging.
Also recheck the harness. A harness pinched under a panel or pulled tight can fail again, even when the new lock is correct.
Wear work gloves when handling sharp panel edges or old parts. Take your time with the connectors and confirm the clip is seated.
Keep the old part until the washer passes a full test cycle. If you are unsure at any step, stop, as a lid lock is a safety part.
Final choice for the best Kenmore washer lid switch
Pick the SuperDi 3949247 10-pack when your washer uses the 3949247 family. It suits a household with more than one compatible washer, a rental property or a repair bench, though a single washer may not need ten switches.
Pick the M Motico W10404050 kit when you need the lock assembly, strike and bezels together. That bundle helps when the fault involves the whole latch area rather than the switch alone.
Choose the M Motico or Techecook W11307244 assembly when that part family matches your washer. Compare the exact model list, wire count and warranty terms.
Choose the ZNTVW kit when you need a W10404050-style latch with two bezel colours and instructions. It is practical when panel trim colour matters as much as the latch itself.
The best Kenmore washer lid switch is the exact compatible part, not simply the closest-looking shape. Confirm the model, part number, connector and wire count before you order.
Use the old switch as your guide. If its number is 3949247, start with the SuperDi family.
If it is W10404050 or W10238287, start with the W10404050 kits.
If its number is W11307244 or W10682535, start with the W11307244 assemblies. Also weigh the box contents, since a strike, bezels or instruction sheet can matter.
None of those extras can fix a wrong part family. Order only after the numbers line up, as that check turns a purchase into a repair that gets your washer running again.
Our top 3 picks at a glance
-
1
Best for complete W10404050 repairs
M Motico UPGRADED W10404050 W10238287 Washer Lid Lock
9.6/10 our score
See it on Amazon -
2
Best for W11307244 coverage
W11307244 W10682535 Washer Lid Lock Switch Compatible
9.5/10 our score
See it on Amazon -
3
Best for 3-wire W11307244 locks
Techecook 2026 Upgraded W11307244 W10682535 Washer Lid
9.4/10 our score
See it on Amazon
Frequently asked questions
How do I choose a Kenmore washer lid switch?
Choose by the washer's exact model number and the part number printed on the old switch. The 3949247 family differs from W10404050, W10238287, W11307244 and W10682535 assemblies, so a similar-looking latch may still be the wrong replacement.
What is the best Kenmore washer lid switch for a 3949247 repair?
The SuperDi 10Pcs 3949247 Washer Lid Switch Fits is the strongest match when your washer uses the 3949247 family. It includes 10 switches and lists several Whirlpool and Kenmore replacement numbers, but you still need to confirm the model before ordering.
What does a Kenmore washer lid lock assembly do?
A lid lock assembly keeps the washer lid from opening during wash and spin cycles. A failed lock can be linked with symptoms such as a washer that will not start, spin, agitate or advance through a cycle, but other washer faults can cause similar symptoms.
Are W10404050 and W11307244 the same lid switch?
No. W10404050 and W10238287 identify one lid-lock family, while W11307244 and W10682535 identify another.
Check your washer model and the old part number before choosing between them.
What should I do before replacing a Kenmore lid switch?
Unplug the washer and shut off the water supply before beginning work. Use the instructions for your exact assembly, keep screws organized, and stop if the replacement connector, wire count or mounting points do not match.
