5 Best Long Washer Drain Hoses (November 2026)
The best long washer drain hoses include the Elyfree 16.4ft Washing Machine Drain Hose for most long washer runs, the HLMOptimo 23 Feet Universal Dishwasher Drain Hose for the farthest drain outlet, and the Elyfree 13-Ft Washing Machine Drain Hose Universal for medium-length extensions.
On this page (6 sections)
The best long washer drain hose for most homes is the Elyfree 16.4ft Washing Machine Drain Hose. It gives you 16.4 ft of reach for a washer that sits far from its drain.
That length suits laundry rooms where the machine cannot sit close to a standpipe or utility sink. You get more routing room than a short replacement without moving to the longest option in this group.
The kit includes four connection sizes, a U-bend holder and 4 clamps. That mix helps you match the washer outlet, guide the discharge end and secure the connection after setup.
Longer is not always better for daily use. The right hose should reach the drain with a supported, open route while staying within your washer's installation length and height limits.
Extra hose can create loose coils behind the machine if the route is short. Measure the full path first, including the space behind the washer and the turn toward the drain.
This pick suits a replacement job or an extension where 16.4 ft is enough. It is a practical middle ground between a 10 ft hose and a 23 ft hose for many extended layouts.
If you need a brand-specific fit, compare this guide with our best LG washer drain hose picks. That check can help when a standard universal size is not the right match.
For a hose that needs to turn neatly into a standpipe or sink, our guide to the best washer drain hose elbow can help. A clean turn can make a long route easier to support.
Set the discharge end with the holder before you push the washer back. Then check the route again, since moving the machine can flatten or tighten a section of hose.
If the drain is only a short distance away, a shorter hose may be easier to care for. Choose length from the actual route, not from the idea that more reach is always safer.
Our picks at a glance
-
1
Best for most long washer runsElyfree 16.4ft Washing Machine Drain Hose
9.7/10 our score
See it on Amazon -
2
Best for the farthest drain outletHLMOptimo 23 Feet Universal Dishwasher Drain Hose
9.6/10 our score
See it on Amazon -
3
Best for medium-length extensionsElyfree 13-Ft Washing Machine Drain Hose Universal
9.3/10 our score
See it on Amazon
- 4
Check itPEVEPEXE 10FT Washing Machine Drain Hose
Best for a shorter long-hose route - 5
Check itToutoulee 20 FT Washing Machine Drain Hose
Best for long extension flexibility
The best long washer drain hose options
Elyfree is the strongest overall choice for a long washer drain hose, while HLMOptimo is better when you need the most reach. The other picks cover medium, shorter and extension-focused layouts.
Our score weighs length, connector range, included setup parts, material and fit for the searcher's need.
Elyfree 16.4ft Washing Machine Drain Hose: Best for most long washer runs
- 16.4 ft length
- 4 connection sizes
- PP material
- U-bend holder and 4 clamps
The 16.4 ft hose gives most laundry rooms useful extra reach without moving to the longest option here. Four cut-to-fit connection sizes, a U-bend holder and 4 clamps make it a flexible replacement or extension kit.
Pros
- Long reach
- Four connection sizes
- Includes U-bend holder and 4 clamps
Cons
- The connector must be cut to fit
- Longer than needed for short routes
Elyfree's 16.4 ft length is long enough for many washers that cannot sit close to a standpipe or utility sink. It gives you more routing room than the 10 ft and 13 ft choices without reaching the extreme length of the 23 ft option.
The hose uses polypropylene (PP) and has a corrugated design. That shape helps it bend around a laundry area while reducing the chance of a sharp fold that could restrict the route.
Its connector can be cut for 3/4, 7/8, 1-1/4 or 1-1/2 in connections. Measure the washer outlet before trimming because cutting too far cannot be undone.
The kit includes a U-bend hose holder and 4 adjustable clamps. That combination suits a replacement installation where you need to guide the discharge end and secure the connection.
Choose it when your drain is moderately far away and you want one kit with several connector sizes. If your route is close to 23 ft, measure carefully before choosing a shorter hose.
HLMOptimo 23 Feet Universal Dishwasher Drain Hose: Best for the farthest drain outlet
- 23 ft length
- EVA material
- Extension adapter
- U-bend holder and clamps
HLMOptimo offers the most reach in this group for a washer far from its standpipe or utility sink. Its adapter supports extension use, while the formed connector can be cut to fit several outlet sizes.
Pros
- Longest hose here
- Includes extension adapter
- Four connection sizes
Cons
- 23 ft may create excess hose
- Only 2 hose clamps are specified
HLMOptimo is the best choice when the washer drain outlet is far from the standpipe or utility sink. Its 23 ft length gives it the most reach in this roundup.
The hose uses flexible EVA material and includes an extension adapter. You can use the adapter to connect the hose to an existing drain hose when a direct route is not practical.
Its formed connector covers 3/4, 7/8, 1-1/4 and 1-1/2 in outlet sizes. The connection can be cut to fit, so measure the washer outlet before making the first cut.
The kit includes 1 hose, 1 extension adapter, 1 U-bend holder and 2 hose clamps. Because 23 ft creates more material to manage, plan the route before moving the washer back against the wall.
Choose HLMOptimo when reach is the main problem. Pick Elyfree instead if 16.4 ft is enough and you want 4 clamps in the kit.
Elyfree 13-Ft Washing Machine Drain Hose Universal: Best for medium-length extensions
- 13 ft length
- Thick PP material
- 4 connection sizes
- 4 stainless steel clamps and U-bend holder
The 13 ft Elyfree fits layouts that need more reach than a standard hose but not the full length of a 16.4 ft or 23 ft option. Its 4 clamps and U-bend holder support a more controlled route.
Pros
- Useful middle length
- Four connection sizes
- Includes 4 clamps
Cons
- Less reach than the top two
- The connector may need trimming
The 13 ft Elyfree is a good middle ground for a washer drain hose long enough to cross a modest gap. It gives more reach than a basic short replacement without leaving as much extra hose as a 20 or 23 ft option.
The hose is made from thick plastic and uses four connection sizes from 3/4 to 1-1/2 in. The connector design lets you trim the end to match the washer outlet.
This kit includes a U-bend hose holder and 4 stainless steel clamps. The holder can be moved along the hose to help position the discharge end.
That setup suits a washer placed across a small laundry room or near a utility sink with a bend in the route. You can form a broad curve instead of forcing a tight fold behind the machine.
Measure the outlet before you cut the connector. A square cut and a clean edge will help the hose sit fully on the connection.
Choose it when 10 ft is close but 16.4 ft would leave too much extra material to route. If your connection needs a size outside its stated range, choose another hose.
PEVEPEXE 10FT Washing Machine Drain Hose: Best for a shorter long-hose route
- 10 ft length
- Rubber material
- Three interface sizes
- Two clamps and U-bend holder
PEVEPEXE is the practical choice when a 10 ft hose reaches the drain and you want less excess to route behind the washer. Its three interface sizes cover a different range from the four-size kits above.
Pros
- Shortest option here
- Three interface sizes
- Includes 2 clamps and U-bend holder
Cons
- Less reach for distant drains
- Fewer connector sizes than the Elyfree options
PEVEPEXE is the right fit when 10 ft covers the distance from your washer to its drain. A shorter long hose can be easier to route and less likely to create a loose coil behind the appliance.
The hose uses rubber and has a corrugated flexible design. Its interface includes 1, 1-1/8 and 1-1/4 in sizes, so compare those measurements with the washer connection before ordering.
The package includes 2 clamps and a U-bend holder. The holder helps guide the end into the drain while the clamps secure the connection after the correct size is selected.
This length suits a nearby utility sink or a standpipe that is just beyond the reach of a standard hose. You still get extension room without managing a much longer length.
Cut the interface to the correct size and tighten the clamp with care. Secure does not need to mean overtightened, and the hose should remain supported along its route.
Choose PEVEPEXE for a shorter extension or replacement route. It is less suitable when the drain is more than 10 ft away or when your outlet needs one of the four-size connector ranges offered by other picks.
Toutoulee 20 FT Washing Machine Drain Hose: Best for long extension flexibility
- 20 ft length
- PP material
- Extension adapter
- 2 clamps and U-bend holder
Toutoulee gives nearly the reach of the longest pick while including an extension adapter for existing hose connections. Its stepped connector can be trimmed to the size required by a compatible drain outlet.
Pros
- 20 ft of reach
- Includes extension adapter
- Four stepped connector sizes
Cons
- More hose than many rooms need
- The connector must be trimmed carefully
Toutoulee offers 20 ft of reach for a washer that needs a long route but not quite the full 23 ft of HLMOptimo. Its PP material and corrugated shape are suited to bends around a laundry area.
The stepped connector provides four sizes: 0.78, 0.94, 1.2 and 1.5 in. Trim the connector to the size required by the compatible appliance drain outlet, and measure first because the cut changes the available fit.
The kit includes an extension adapter, 2 hose clamps and a U-bend holder. That makes it useful for replacing a hose or extending an existing one.
This option suits a washer moved to a far wall or a layout where the drain sits past a doorway or cabinet. The extra length gives you room to form a smooth path instead of stretching the hose.
Plan where the adapter will sit before you connect it. Keep that joint supported, since a hanging connection can put stress on the washer outlet.
Choose Toutoulee when you want a very long hose with an adapter included. Pick HLMOptimo if you need the longest option, or Elyfree if 16.4 ft is enough and you prefer 4 clamps.
How do you choose a washer long drain hose length?
Choose the shortest hose that reaches the drain with a smooth, supported route. A 10 ft hose can suit a nearby utility sink, while 13 ft or 16.4 ft gives more room for a washer placed across the room.
Use 20 ft or 23 ft only after measuring the full path. Include the distance behind the washer, the turn toward the drain and the height needed to keep the discharge end secure.
Do not assume that a hose can be any length simply because it fits the outlet. Check your washer's installation instructions for the allowed drain length and maximum drain height.
If your washer is a Whirlpool model, compare the connection needs with our guide to the best Whirlpool washer drain hose. Maytag owners can also review the best Maytag washing machine drain hose replacement options.
Which connector size does your washer drain hose need?
The connector size must match the washer outlet and the way the hose enters the drain. A hose can be long enough and still fail to fit if the connection end is wrong.
Speed Queen owners can compare Speed Queen washer drain hoses for model-specific options. That route is worth checking before you trim a universal connector.
Elyfree 16.4 ft, HLMOptimo and Elyfree 13 ft list four connection sizes, while PEVEPEXE lists three and Toutoulee uses a four-size stepped connector. The ranges overlap, but they are not identical in every step.
Measure the washer outlet before you order, not after the hose arrives. Compare the measurement with the stated range and note whether the end needs to be cut.
Measure the outlet before cutting a stepped or trimmable connector. Keep the cut square and remove loose plastic so the hose can sit fully on the connection.
A clean cut also helps the clamp sit flat around the hose. If the edge is uneven, the connection can shift when the washer drains.
A clamp can help hold the connection in place, but it cannot correct a connector that is too large or too small. Too large will leave a gap, and too small will prevent a full fit.
The drain end matters too, especially with a standpipe or utility sink. The U-bend holder helps keep that end in position while the washer pumps water.
If the fit is uncertain, compare the washer manual or existing hose measurements before ordering. The old hose is a useful reference for the outlet size and route height.
You should also check the drain height against the washer instructions. A connector that fits will not fix a route that asks the machine to pump too high.
For extension use, confirm both connections before you add length. An adapter joins two hoses, but each end still needs its own correct size.
This extra check takes a few minutes and can prevent a return. It also keeps you from cutting a connector down too far on a first guess.
The safest order is measure, compare, then trim. That order protects the fit and leaves you with a simpler setup to care for over time.
How should you route a long washer drain hose?
Route the hose in a broad curve with no sharp fold behind the washer. Use the U-bend holder to guide the discharge end into the standpipe or utility sink and keep it from slipping out of position.
Push the washer back slowly after installation. Watch the hose as the machine moves so it does not flatten against the wall or form a tight bend.
Keep any extension connection supported rather than letting its full weight hang from the washer outlet. HLMOptimo and Toutoulee include adapters for extension use, but the completed route still needs to stay within the washer's allowed installation limits.
If the washer drains slowly after setup, check for a kink, a crushed section, a loose connection or an outlet height problem. The issue may be the route rather than the hose length.
Can a long washer drain hose prevent leaks?
A correctly sized hose and secure clamp can reduce the chance of a loose connection, but no hose length by itself guarantees a leak-free installation. Length only helps the hose reach the drain.
Check the connector fit, clamp position and drain-end support before running a full wash. A short test with a small amount of water lets you spot trouble earlier.
The washer outlet is the first place to inspect. Make sure the hose sits fully on the connection and the clamp holds it without crushing the hose wall.
The drain end is the second place to inspect. Use the U-bend holder so the hose stays in the standpipe or sink when the machine starts to drain.
Route the hose in a broad curve and avoid sharp folds behind the washer. A flattened section can slow drainage and put pressure on the connection.
If you use an extension adapter, support the joint so its weight does not hang from the outlet. A supported joint is easier to check and less likely to move during a cycle.
Replace a hose with visible damage or a connection that no longer stays secure. Cracks, deep deformation or a connector that slips are signs to stop using it.
When a washer is draining into a pan or a tight space, check the setup around the hose as well. Our guide to the best metal washer drain pan covers another part of the installation setup.
Keep the area around the connection dry and visible after install. That makes it easier to notice a slow drip before it becomes a larger problem.
A leak-free setup comes from fit, support and checking the route. Those three steps matter more than hose length alone.
Final choice: which long washer drain hose should you buy?
Choose the Elyfree 16.4ft if you need a versatile washer drain hose long enough for most extended routes. It balances reach, connector choice and included setup parts.
Choose HLMOptimo 23 ft for the farthest drain, Elyfree 13 ft for a medium gap, PEVEPEXE 10 ft for a shorter route, and Toutoulee 20 ft when an extension adapter matters. Each pick answers a different layout problem.
Measure the route and outlet before ordering. Include the space behind the washer, the turn to the drain and the height of the discharge end.
Leave room for a smooth curve rather than a tight bend. A shorter hose that fits the route well can be easier to support than a very long hose with extra coils.
If your washer drains poorly after installation, compare the route with the machine's drain instructions. Check for kinks, flattened sections and outlet height before replacing other parts, such as a Maytag washer drain pump.
Also check the clamp and holder after you move the washer back into place. The machine can shift the hose as it settles against the wall.
For households replacing an older machine as part of the same project, our best high efficiency washer guide can help with the next decision. It is easier to plan hose length, drain position and machine placement together.
If you are keeping the current washer, focus on the connector size and route. A correct fit at both ends will make daily care simpler and help you spot leaks early.
Choose the shortest length that reaches with support. That choice gives you a clean route, less extra hose to manage and a setup that is easier to check over time.
Our top 3 picks at a glance
-
1
Best for most long washer runs
Elyfree 16.4ft Washing Machine Drain Hose
9.7/10 our score
See it on Amazon -
2
Best for the farthest drain outlet
HLMOptimo 23 Feet Universal Dishwasher Drain Hose
9.6/10 our score
See it on Amazon -
3
Best for medium-length extensions
Elyfree 13-Ft Washing Machine Drain Hose Universal
9.3/10 our score
See it on Amazon
Frequently asked questions
How long can a washer drain hose be?
A washer drain hose should be only as long as your installation needs, within the washer manufacturer's allowed drain length and height. Measure the route first, then choose the shortest option that reaches the standpipe, utility sink or drain without tight bends or loose coils.
A longer hose is not automatically better because extra length can make routing harder.
What is the best long washer drain hose size?
The best long washer drain hose size depends on the distance from the washer outlet to the drain. Choose 10 ft for a shorter extended route, 13 or 16.4 ft for a medium laundry-room gap, and 20 or 23 ft only when the drain is much farther away.
Leave enough room for a smooth route without creating a large coil.
Can you connect a long washer drain hose to an existing hose?
Yes, some long washer drain hoses include an extension adapter for joining a second hose. HLMOptimo and Toutoulee include adapters for extension use.
Use the included clamps where needed, keep the connection supported, and confirm that the combined length stays within your washer's installation limits.
Do washer drain hoses fit every washing machine?
No. Universal washer drain hoses still use specific connector sizes and may require trimming.
Compare the washer outlet with the hose's stated connection range before ordering.
The Elyfree and HLMOptimo options list four connection sizes, while PEVEPEXE lists three.
How do you stop a long washer drain hose from kinking?
Route the hose in a broad curve and use a U-bend holder to keep the discharge end in position. Corrugated hoses can bend around laundry-room layouts, but a tight fold or heavy pressure can restrict drainage.
Check the route after installation and again after pushing the washer back into place.
