9 Best Replacement Drain Pumps for Maytag Washers (November 2026)

The best Maytag washer drain pumps include the Lucky Seven 202203 Washer Drain Pump for older Maytag washers, the TOMOON W10276397 Washer Drain Pump for Whirlpool for W10276397 model matching, and the Cylrod WPW10605427 W10425238 Washer Drain Pump Intended for listed Maytag front-loaders.

On this page (6 sections)

1. Which Maytag washer drain pump is best for your model?
2. Best Maytag washer drain pump picks
3. How do you choose a Maytag washer drain pump?
4. What should you check before installing a Maytag drain pump?
5. How can you reduce repeat drain-pump problems?
6. Which Maytag washer drain pump should you buy?

The best Maytag washer drain pump for most older machines is the Lucky Seven 202203, provided your old pump uses a matching number such as 202203, 202540 or WP6-2022030. For newer Maytag designs, the right choice depends on the exact pump family and washer model, not the Maytag name alone.

Many households discover a drain pump problem only when a load ends with water still in the tub. That symptom can point to a worn pump, but it can also come from a blocked hose, a clogged filter or debris caught near the pump inlet.

Before ordering anything, take a clear photo of the old pump and write down every number you can see on it. Also note the washer model tag, whether the machine is top-load or front-load, and how the hoses connect to the pump.

Older Maytag washers often use pulley or belt driven parts that look quite different from later electric pump assemblies. Newer machines may use a sealed motor pump, a front-load filter housing or a pump family shared with Whirlpool and Kenmore models.

Our score weighs part-number coverage, stated compatibility, pump design and useful installation details against the needs of someone shopping for a Maytag replacement. We checked the listed specifications and model references, but we did not test these pumps in washers.

That means each pick should be read as a compatibility guide rather than a guarantee. A pump can be well made and still be the wrong shape, voltage or mounting style for your cabinet.

If your old pump number matches the Lucky Seven family, it is a sensible first option for an older Maytag machine. If it matches W10276397, WPW10605427, W10130913, W10536347, W11399437 or 21001906, use the matching section below instead.

Take time at the ordering stage to compare the old part and the replacement side by side. That simple check can save a second return trip and keeps the repair focused on the part that actually failed.

Also check the drain hose and filter before you fit a new pump. A pump fitted to a washer with a kinked hose or blocked filter may still drain slowly, and the new part will not fix a problem that sits elsewhere in the system.

Our picks at a glance

1. 1
   Best for older Maytag washers

   Lucky Seven 202203 Washer Drain Pump

   9.7/10 our score

   See it on Amazon
2. 2
   Best for W10276397 model matching

   TOMOON W10276397 Washer Drain Pump for Whirlpool

   9.6/10 our score

   See it on Amazon
3. 3
   Best for listed Maytag front-loaders

   Cylrod WPW10605427 W10425238 Washer Drain Pump Intended

   9.4/10 our score

   See it on Amazon

4. 4

   BlueStars W10276397 Washer Drain Pump for Whirlpool

   Best for a second W10276397 option
   Check it
5. 5

   BlueStars WPW10730972 W10130913 8540024 Washer Drain Pump

   Best for higher-flow front-load repairs
   Check it
6. 6

   REEPLAR 280187 8181684 Front Load Clothes Washer

   Best for complete front-load assemblies
   Check it
7. 7

   Blutoget 2026 UPGRADED W10536347 W10155921 W10049390 Washer

   Best for W10536347 replacements
   Check it
8. 8

   Salugre W11399437 Washer Drain Pump Assembly Compatible

   Best for newer W11399437 matching
   Check it
9. 9

   Aillsa 21001906 Washer Drain Pump with Pulley

   Best for pulley-style replacements
   Check it

Which Maytag washer drain pump is best for your model?

The correct Maytag washer drain pump is the one whose part number, connector, mounting pattern and model list match your machine. Brand name alone is not enough, because Maytag has used several different pump designs over the years.

The 202203 family suits older designs, while W10276397, WPW10605427, W10130913, W10536347, W11399437 and 21001906 belong to different replacement paths. Each family can look similar at a glance, yet the ports, electrical rating and mounting points may differ.

Start with the number stamped on the old pump, then check it against the replacement list for each option below. Photograph the pump from the front and side so you can compare hose positions and pulley placement.

If the number is hard to read, use the washer model tag and the parts documentation for your machine. That helps narrow the family before you compare flow rate, voltage or construction details.

Top-load and front-load washers also place the pump in different areas and use different housings. Confirm the design of your machine, not just the brand, before you move on to the individual picks.

Best Maytag washer drain pump picks

The Lucky Seven is the strongest starting point for older Maytag machines, while the other picks cover specific part families and washer designs. Read each section as a compatibility check, not as a promise that one pump fits every Maytag washer.

1

Lucky Seven 202203 Washer Drain Pump: Best for older Maytag washers

9.7/10Our score

• Replaces 202203, 202540 and WP6-2022030
• Plastic pump with metallic belt pulley
• Fits Maytag, International and Jenn-Air washers
• 6 x 5 x 5 in

This pump is the clearest match for older Maytag designs that use the 202203 or WP6-2022030 family of part numbers. Its plastic body and metallic belt pulley suit a direct replacement focused on part-number matching.

See it on Amazon

Pros

• Wide replacement number range
• Metallic belt pulley
• One pump included

Cons

• Compatibility depends on the old pump number
• Not a universal Maytag replacement

Lucky Seven is the best match here for older Maytag washers that use the 202203, 202540, 6-2022030 or WP6-2022030 family. It also names International and Jenn-Air washers, which can help when a related-brand machine uses the same pump design.

The pump body is plastic and the belt pulley is metallic. That combination matters because the pulley must match the belt-driven setup in your washer.

Compare the old pump's pulley position and part number before ordering. A pulley pump will not work in place of a direct electric pump, even if the washer brand happens to match.

The package includes 1 washer drain pump. Its stated dimensions are 6 x 5 x 5 in, and the model is identified as 5011.

Those dimensions are useful when you compare the replacement with the space under or behind your older machine. Check clearance and hose reach before you remove the old part.

This is the clearest pick when your old part carries one of the listed 202203-family numbers. It is not a general replacement for every Maytag washer, so do not choose it for a W10276397 or WPW10605427 machine simply because both are Maytag parts.

If your washer is from the later part number families, look at the matching section instead. Choosing by age and design, as well as by brand, keeps the repair straightforward.

2

TOMOON W10276397 Washer Drain Pump for Whirlpool: Best for W10276397 model matching

9.6/10Our score

• 120V, 60Hz and 85W
• Fits selected Maytag, Whirlpool and Kenmore models
• Replaces WPW10276397VP and related numbers
• 1 pump included

TOMOON is a strong choice when your Maytag washer uses the W10276397 pump family. The title identifies voltage, power and several replacement numbers, while the model list covers selected Maytag top-load designs.

See it on Amazon

Pros

• Clear electrical specifications
• Long replacement-number list
• Drain-hose maintenance guidance

Cons

• Requires exact model matching
• Fits a specific pump family

TOMOON is the best fit here for selected Maytag washers using W10276397 or one of its related numbers. The pump is rated at 120V, 60Hz and 85W, and the stated material is acrylonitrile butadiene styrene.

The replacement list includes WPW10276397VP, B40-3A, 1874334, AP6018417 and LP397. TOMOON also names selected Maytag, Whirlpool and Kenmore models, including several 7MMV and 7MMVWC references.

The package includes 1 W10276397 washer drain pump. Its non-removable impeller means lint, hair and fabric scraps can collect inside the sealed chamber, so keeping the washer filter clean can reduce debris reaching the pump.

That sealed design is a practical trade-off for daily use. It keeps the internal parts enclosed, but it also means routine filter cleaning matters more than it might on a pump you can open and clear by hand.

TOMOON gives a drain-hose height range of 60 to 90 cm and warns against a flat or kinked hose. Check the hose setup before blaming the pump for drain noise or slow water movement.

High flow during spin draining can sound loud even when the pump is working as intended. If the hose is secured at the right height and has no kinks, a noisy drain period may simply be water moving quickly through the hose.

Match the B40-3A marking and the full part number on the old pump before ordering. This pump suits the W10276397 family only, so it should not be used as a substitute for other Maytag pump designs.

3

Cylrod WPW10605427 W10425238 Washer Drain Pump Intended: Best for listed Maytag front-loaders

9.4/10Our score

• Fits selected Maytag front-load washers
• 120V
• 20 liters per minute flow rate
• ABS shell with rubber sealing gasket

Cylrod targets selected Maytag front-load washers, including listed MHW models. Its ABS shell, rubber sealing gasket and 20-liter-per-minute flow rate make it a focused option for the WPW10605427 and W10425238 family.

See it on Amazon

Pros

• Front-load compatibility is clearly stated
• Rubber sealing gasket
• 20 liters per minute flow rate

Cons

• Not intended for every Maytag design
• Model verification remains necessary

Cylrod is the strongest choice here for listed Maytag front-load washers using WPW10605427, W10425238 or W10605427. The stated model references include MHW5100DW0, MHW3505FW1, MHW5500FW1 and other Maytag MHW designs.

Its pump has a stated flow rate of 20 liters per minute and a 120V power specification. The shell uses ABS material, while the sealing gasket uses rubber, so the gasket and hose connections deserve close attention during installation.

ABS is used here because it resists deformation and corrosion in a damp environment. The rubber gasket is the part that must seat evenly, since a poorly seated seal can cause a leak even when the pump itself is sound.

The replacement family also includes W10799064, W10799065, W10903216, AP6023357, PS11756700 and PS11754613. That wider number range can help when the old pump has more than one identifier.

Cylrod describes the installation as a short repair after power is disconnected and the old pump is accessed below the drum. Confirm your washer's service access before starting, since front-load cabinets differ.

Front-load pump access can vary from one cabinet to another, so check whether your model allows entry from the front, rear or below the drum. Having the panel removal steps clear first will make the hose and plug changes easier to manage.

This pump is intended for front-load designs in the listed family. It should not be chosen for a top-load Maytag washer, even if the symptoms of a failed drain look the same.

4

BlueStars W10276397 Washer Drain Pump for Whirlpool: Best for a second W10276397 option

9.3/10Our score

• 120V, 60Hz and 85W
• Fits selected Maytag, Whirlpool and Kenmore models
• Replaces W10276397 family numbers
• 5.8 x 6.1 in

BlueStars gives you another W10276397 replacement route for selected Maytag washers. Its stated 120V, 60Hz and 85W specifications align with the same pump family as the TOMOON option.

See it on Amazon

Pros

• Clear electrical specifications
• Broad compatible-brand list
• One pump included

Cons

• Model number must match
• The dimensions are presented in a compact format

This BlueStars pump is another W10276397 option for selected Maytag washers. Its stated electrical details are 120V, 60Hz, 85W and 0.95A, so compare those values and the part number with the old pump before choosing it.

The replacement numbers include AP6018417, WPW10276397, WPW10276397VP, PS11751719, 1874334, AH2580215, EA2580215, B40-3A and LP397. It names selected Whirlpool, Maytag, Kenmore, Amana, Crosley, Inglis, Roper and Admiral machines.

One W10276397 washer drain pump is included. BlueStars also describes it as a replacement for washers that will not drain or leak, but those symptoms can have other causes, including a blocked hose.

Check the hose and filter before you fit the pump, because a blockage can leave water in the tub even with a new pump installed. That quick inspection can prevent a repeat repair and wasted effort.

BlueStars lists compact dimensions for this pump, so compare the body size with the space in your washer cabinet. A pump that matches by part number should still sit correctly and allow the hoses to connect without strain.

Choose this model when the W10276397 family matches your Maytag washer and you want an alternative to the TOMOON version. The two options should not be treated as universal substitutes for other Maytag pump families.

If your old pump carries a different number, such as 202203 or WPW10605427, use the relevant section instead. Part number matching remains the safest way to choose between these similar looking replacements.

5

BlueStars WPW10730972 W10130913 8540024 Washer Drain Pump: Best for higher-flow front-load repairs

9.2/10Our score

• 45 liters per minute flow rate
• 85W and 3000 rpm rotor rotation
• ABS plastic construction
• Fits selected Whirlpool, Kenmore and Maytag models

This BlueStars assembly fits a different pump family from the W10276397 options. Its 45-liter-per-minute flow rate and listed W10130913, WPW10730972 and 8540024 numbers suit selected Maytag 2000, 3000 and 4000 series references.

See it on Amazon

Pros

• Highest stated flow rate here
• Large replacement-number range
• Installation tool list is clear

Cons

• Not interchangeable with W10276397
• Compatibility depends on the washer model

This BlueStars assembly suits selected Maytag 2000, 3000 and 4000 series references that use W10130913, WPW10730972 or 8540024. It is a different design from the W10276397 pumps above.

The stated flow rate is 45 liters per minute, with 85W power and 3000 rpm rotor rotation. The pump uses ABS plastic, and the replacement list includes PS11757304, AP6023956, 8540025, 8540027, 8540028 and several W101 and W102 numbers.

The package includes 1 W10130913 washer drain pump. BlueStars names a 1/4 in nut driver, 5/16 in nut driver, flat blade screwdriver and pliers for the repair, along with a warning to disconnect washer power first.

Having the tool list before you start helps you plan for panel screws, hose clamps and connectors. It also reminds you that this repair involves electrical power, so the machine should stay unplugged until the new pump is connected.

The higher stated flow rate does not make this pump suitable for every Maytag washer. Use the model number and old pump number to confirm the W10130913 family before comparing this option with W10276397.

Flow rate is only one part of compatibility, and a faster pump still needs the correct ports and mounting pattern. Match the old pump physically as well as by number before you order.

This assembly is a focused choice for the listed front-load style references. If your Maytag washer uses a pulley pump or a different part family, one of the other picks will be a closer match.

6

REEPLAR 280187 8181684 Front Load Clothes Washer: Best for complete front-load assemblies

9.1/10Our score

• Complete assembly with motor, filter and housing
• 120V, 60Hz and 0.95A
• Fits selected Maytag front-load washers
• 280187 and 8181684 part family

REEPLAR is aimed at selected Maytag front-load designs that use the 280187, 8181684 or related part numbers. The complete assembly includes the motor, filter and inlet and outlet plastic housing.

See it on Amazon

Pros

• Complete pump assembly
• Filter included in the assembly
• Long compatibility list

Cons

• Only fits selected front-load models
• Exact model checking is essential

REEPLAR is a practical choice when your Maytag front-load washer uses the 280187, 8181684, AP3953640 or PS1485610 family. The assembly includes the motor, filter and inlet and outlet plastic housing rather than only a separate motor.

Its stated electrical specifications are 120V, 60Hz and 0.95A. The compatible Maytag references include 7MGHW9100MW0, 7MGHW9150, 7MGHW9400, KHWS01PM and KHWS02R, along with selected MHW models.

The assembly also names many Whirlpool and Kenmore front-load models. That broad list is useful for shared designs, but it makes exact model matching more important because front-load pump layouts can vary.

A complete assembly can be a helpful trade-off when the filter housing or plastic parts are worn along with the motor. Replacing the assembly as a unit may be simpler than trying to reuse housing parts that are cracked or brittle.

REEPLAR identifies the included component as the pump body in its specifications, while its product description identifies the complete assembly as including the motor, filter and housing. Check the package contents before beginning the repair.

Compare the new assembly with the old one part by part before you disconnect anything. That check confirms the inlet, outlet and filter positions match your washer layout.

This option is for selected front-load models only. If your washer is a top-load design or uses a different part family, choose a pump from a matching section instead.

7

Blutoget 2026 UPGRADED W10536347 W10155921 W10049390 Washer: Best for W10536347 replacements

8.6/10Our score

• 85W and 110V
• Strong ABS and metal construction
• Includes 3 mounting screws
• Fits selected Whirlpool, Kenmore and Maytag washers

Blutoget suits selected Maytag washers using the W10536347, W10155921 or W10049390 family. The package includes 3 mounting screws, and the pump is rated at 110V and 85W.

See it on Amazon

Pros

• Mounting screws included
• ABS and metal construction
• 16-foot maximum lifting height

Cons

• Different part family from the older Maytag pumps
• Model matching is still required

Blutoget is designed for selected Maytag washers using W10536347, W10155921 or W10049390. It is rated at 110V and 85W and includes 3 mounting screws, which can help when the original hardware is damaged or missing.

The pump uses strong ABS and metal construction and has a stated maximum lifting height of 16 feet. The package includes 1 washer drain pump and 3 mounting screws.

The replacement list includes 8542672, W10217134, W10238317, W10281682, AP5650269, PS5136124 and EAP5136124. Blutoget also names selected Whirlpool, Kenmore and Maytag models, including several WTW, MVWB and Kenmore references.

Included screws are a small but useful detail for a repair where old hardware may be corroded or lost. Check that the screw size and positions match your washer before you rely on them during installation.

The 16-foot maximum lifting height is relevant when the drain point sits well above the washer. Confirm your hose route and standpipe height so the pump is not asked to work beyond its stated limit.

Choose it when your old pump belongs to this family and the mounting layout matches. Its 110V rating and screw pattern are useful checks before installation.

Note the voltage difference from the 120V pumps elsewhere in this guide. That rating is one reason exact part matching matters, since similar looking pumps may be built for different electrical setups.

8

Salugre W11399437 Washer Drain Pump Assembly Compatible: Best for newer W11399437 matching

8.3/10Our score

• W11399437 replacement assembly
• Fits selected Whirlpool, Maytag, Kenmore and Crosley washers
• Washer drain pump motor included
• Replaces 6 listed part numbers

Salugre is for buyers whose washer calls for W11399437 or one of its listed replacement numbers. It is a simple pump-motor assembly choice for selected Maytag and related-brand washers.

See it on Amazon

Pros

• Clear W11399437 match
• Four compatible brands named
• One assembly included

Cons

• Fewer model details are given
• Verify the exact washer model before ordering

Salugre is the focused choice for a Maytag washer that calls for W11399437. It also replaces PD00058225, W11259498, 4961028, AP6974144, PS12731241 and EAP12731241.

The pump is compatible with selected Whirlpool, Maytag, Kenmore and Crosley washers. Its included component is identified as a washer drain pump motor, with 1 item and 1 count in the specifications.

The product information does not name a long list of Maytag model numbers, so use the washer model tag and old pump number as your main checks. A shared brand family is not enough to confirm fit.

That limited model list is the main trade-off with this option. It works well when you already know the replacement number, but it gives you less model reference material if you are still trying to identify the pump family.

Salugre makes sense when W11399437 is already identified as the replacement number for your machine. If you only know that the washer is a Maytag, compare the other part families first.

Before ordering, photograph the old pump and compare its shape, ports and connector with the replacement. That visual check adds confidence when the written model list is short.

Keep the old pump until the repair is tested, in case a connector or mounting point does not match. Returning an unused part is easier when the original is still intact and available for comparison.

9

Aillsa 21001906 Washer Drain Pump with Pulley: Best for pulley-style replacements

8.0/10Our score

• 21001906 pump with two ports
• Metal pulley attached
• Fits selected Maytag and related brands
• Durable plastic and metal construction

Aillsa fits selected Maytag designs that use the 21001906 pump with pulley. Its two-port design and attached metal pulley make it a different replacement path from the direct motor-pump assemblies above.

See it on Amazon

Pros

• Attached metal pulley
• Two-port design
• Wide related-brand compatibility

Cons

• Only for the 21001906 family
• Pulley and port layout must match

Aillsa suits selected Maytag washers that use the 21001906 pump with pulley. The design has two ports, durable plastic and metal construction, and a metallic pulley attached to the pump.

The replacement numbers include AP6008659, 21001589, 21001732, 35-2057, 35-2099, 35-3834, 35-6465, WP35-6465VP, WP35-6780 and LP128. It also names Whirlpool, Roper, Admiral, Hardwick, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Kenmore, Caloric and Ikea.

The package includes 1 21001906 washer drain pump with pulley. The stated dimensions are 7 x 7 x 5 in.

A pulley pump is a different repair path from a direct electric pump, so the belt and pulley alignment need care during installation. Check the belt condition and the pulley position before you reconnect the pump.

Aillsa is useful when the old pump has the same pulley and two-port layout. It should not replace a direct motor-pump assembly from another Maytag family unless the part numbers and mounting design agree.

The two ports must match the inlet and outlet hoses on your washer, with no extra adapters needed. Comparing the old and new pumps side by side will show whether the hose routing lines up.

Tools listed for this repair include a nut driver, putty knife, socket with ratchet and slip joint pliers. Having those tools ready will help with panel access, hose clamps and pulley work.

This pump suits the 21001906 family and related brands that use the same layout. If your washer has a front-load filter housing or a sealed electric pump, a different pick in this guide will fit better.

How do you choose a Maytag washer drain pump?

Choose by the old pump's part number first, then confirm the washer model, design and physical connections. A pump that fits one Maytag top-load series may not fit a Maytag front-load machine, even when the brand and symptoms are the same.

Match the exact replacement number

The most useful number is often stamped on the old pump or printed on the washer's parts documentation. Common families in this guide include 202203, W10276397, WPW10605427, W10130913, 280187, W10536347, W11399437 and 21001906.

Write down every number, including numbers that look like manufacturer or alternate part references. A replacement list can include several valid numbers for the same pump family.

Check top-load and front-load design

Cylrod and REEPLAR focus on front-load washer designs, while several other options name top-load or series-specific models. Compare where the pump sits, how it mounts and whether the old pump uses a belt pulley, filter housing or separate motor.

If your washer has a pulley, the Lucky Seven and Aillsa options are the most relevant designs here. If the pump is part of a front-load filter housing, REEPLAR may be closer to the original assembly.

Compare the hose and electrical details

A replacement needs matching hose ports, connector style and electrical requirements. TOMOON and BlueStars identify 120V and 85W details, while Blutoget identifies 110V and 85W.

Don't use voltage or wattage alone as proof of fit. Those values help narrow the choice, but the part number and model compatibility list remain the primary checks.

What should you check before installing a Maytag drain pump?

Disconnect electrical power and water before opening the washer, then remove standing water and protect your hands. Inspect the drain hose, filter and pump area because a blockage can create symptoms that resemble pump failure.

Clearing debris first often shows whether the pump is actually broken. Coins, hair, lint and small fabric items can stop a pump from draining even when the motor still runs.

The repair steps depend on the washer design. Some pumps are reached from the front or rear, while others sit below the drum or use a pulley and belt.

Front-load machines may require access below the drum or behind a lower panel, while top-load machines can place the pump under the tub. Check the service access for your exact model before you start removing panels.

Photograph hose positions and connector placement before removing the old part. Keep clamps and screws organized, and compare the new pump with the old one before connecting anything.

A simple side by side comparison can reveal a reversed port, a missing gasket or a pulley in the wrong position. It is much easier to correct those issues on the floor than after the pump is mounted.

After installation, check every hose connection for leaks before running a full load. A short rinse or drain cycle can help you observe the repair while the washer is still accessible.

Watch the pump area and the floor during that first test, and stop if you see water escaping. Tighten a clamp or reseat a hose while the machine is still open, rather than waiting for a larger leak.

For cycle behavior, our guide to Drain and Spin vs. Rinse and Spin: Which Do You Need? explains why a washer may drain without adding rinse water.

Understanding that cycle can help you tell a normal drain step from a genuine fault. If the washer drains during the expected part of the cycle, the new pump may already be doing its job.

How can you reduce repeat drain-pump problems?

Clean the washer filter regularly, keep the drain hose free of kinks and check pockets before washing. TOMOON specifically advises cleaning the filter every 1 to 2 months, especially after towels, bedding or pet-hair loads.

Those loads shed more lint and hair than ordinary clothing, so debris can build up faster in the filter and pump area. Checking pockets also helps keep coins and small items away from the drain path.

A drain hose that lies flat or sits at the wrong height can create slow drainage and extra water noise. Confirm the hose position for your washer rather than assuming every machine uses the same setup.

A kinked hose puts extra strain on the pump during spin draining, which can shorten its working life. Straighten the route, secure the hose and check that it stays in place when the washer vibrates.

If a leak has damaged the floor around the washer, a best metal washer drain pan can add a layer of protection. For installations that need a center opening, compare a best washer drain pan with center drain before choosing the pan size.

A drain pump does not solve every washer leak. A damaged door seal, hose or tub connection can need a different repair, such as a best Samsung washer door gasket for the appropriate Samsung machine.

Watch for where the water is coming from before you replace more parts. A leak at the door, a hose connection or the tub will need a different fix from a pump that has stopped draining.

Which Maytag washer drain pump should you buy?

Choose Lucky Seven when your older Maytag pump matches 202203 or WP6-2022030. Choose TOMOON or BlueStars when the number is W10276397, and choose Cylrod or REEPLAR for the specific Maytag front-load families they name.

Those choices cover the most common reasons a Maytag washer stops draining, from an older pulley pump to a newer front-load assembly. The key step in every case is matching the number on the old pump.

Blutoget, Salugre and Aillsa are useful for their own W10536347, W11399437 and 21001906 families. Each one suits a narrower set of machines, so check the model list and physical layout before ordering.

Do not choose a pump by brand alone, even when two machines share the Maytag name. Top-load and front-load designs, voltage ratings and hose connections can all differ between models.

After you fit the replacement, run a short drain test and check for leaks while the washer is still accessible. Also clean the filter and confirm the drain hose has no kinks before you return to normal loads.

If you also maintain other brands, compare our guides to the best LG washer drain pump, best GE washer drain pump and best Kenmore washer drain pump options.

Those guides use the same part-number approach, which helps when a household has more than one washer design. In every case, the old pump number is the best starting point for the repair.

Our top 3 picks at a glance

1. 1
   Best for older Maytag washers

   Lucky Seven 202203 Washer Drain Pump

   9.7/10 our score

   See it on Amazon
2. 2
   Best for W10276397 model matching

   TOMOON W10276397 Washer Drain Pump for Whirlpool

   9.6/10 our score

   See it on Amazon
3. 3
   Best for listed Maytag front-loaders

   Cylrod WPW10605427 W10425238 Washer Drain Pump Intended

   9.4/10 our score

   See it on Amazon

Frequently asked questions

What is the best Maytag washer drain pump?

The Lucky Seven 202203 is the best Maytag washer drain pump here for older machines using 202203, 202540 or WP6-2022030 numbers. For newer or different designs, match the old pump's number to options such as W10276397, WPW10605427, W10536347 or W11399437.

How do I find the correct Maytag washer drain pump?

Find the washer model tag and the number stamped on the old pump, then compare both with the replacement's compatibility list. Maytag pumps use different families, including 202203, W10276397, WPW10605427, W10536347, W11399437 and 21001906.

Can I use a Whirlpool drain pump in a Maytag washer?

Sometimes, because several Whirlpool, Maytag and Kenmore washers share pump families. The TOMOON and BlueStars W10276397 pumps, for example, name selected Maytag models.

Match the exact part number and model before ordering rather than choosing by brand alone.

Why is my Maytag washer not draining?

A Maytag washer may fail to drain because the pump, hose or filter has a blockage or because the pump needs replacement. Disconnect power before checking, remove standing water carefully and inspect the hose path before replacing a pump.

Should I replace the drain pump myself?

You can replace a Maytag washer drain pump if you can safely disconnect power and water and work with basic hand tools. The repair varies by washer design, so follow the service instructions for your model and stop if wiring, leaks or access points are unclear.